20 EN

Recording audio (analog sources)

Recording a music source

1Use the INPUT SELECTOR knob to select the source (other than
“MD/TAPE”) you want to record.
2Set the MD or TAPE recorder to record.
3Start playback, then start recording.

Recording video

1Use the INPUT SELECTOR knob to select the video source (other
than “VIDEO1”) you want to record.
2Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
3Start playback, then start recording.
• Recording may not be normal for some video software. This is due to
the copy guard condition.

Recording audio (digital sources)

Switch on the REC mode to record a digital input source.
Usually use the A-REC (Auto-Record) mode to record audio input
sources. When the digital mode changes during recording in the A-REC
mode, the audio input source may be interrupted momentarily.

Recording music in A-REC or M-REC mode

INPUT SELECTOR
DIMMER
1Use the INPUT SELECTOR knob to select the source (CD/DVD,
DVD/6CH or VIDEO2) you want to record.
2Set the MD or TAPE recorder to record.
INPUT SELECTOR

Normal playback

Adjusting the Loudness mode (remote control only)

You can adjust the Loudness function which controls the low volume
settings to maintain the music’s richness. The adjustment can be made
when the receiver is in the PCM stereo and analog stereo mode.
Press the Loudness key to turn the Loudness setting ON.

To cancel

Press the Loudness key again so that the “Loudness” indicator
goes off.

Muting the sound

The MUTE key lets you mute the sound of the speakers.
Press the MUTE key.

To cancel

Press the MUTE key again so that the “MUTE” indicator goes off.
•MUTE ON can also be deactivated by turning the volume control
knob.

ACTIVE EQ mode

You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in PCM and
analog stereo mode.
Press the ACTIVE EQ key for the following selections;
1ACTIVE EQ MUSIC :Effective when listening to music.
(The ACTIVE EQ LED indicator lights up.)
2ACTIVE EQ CINEMA : Effective when watching a movie.
(The ACTIVE EQ LED indicator lights up.)
3ACTIVE EQ TV :Effective when watching TV.
(The ACTIVE EQ LED indicator lights up.)
4ACTIVE EQ OFF :The ACTIVE EQ function is turned OFF.
(The ACTIVE EQ LED indicator goes off.)
•ACTIVE EQ function will not be available when REC MODE, AUTO
TUNING or PRESET MEMORY is ON and during 96kHz LPCM
playback.

Listening with headphones

1Press the SPEAKERS ON/OFF key so that the speaker indicator
goes off.
•If you turn off all of the speakers when in surround mode, the
surround mode will be canceled as well, resulting in stereo playback.
2Connect headphones to the PHONES jack.
PHONES
3Use the VOLUME CONTROL knob or VOL +/– keys to adjust the
volume.
Make sure the SP indicator is turned OFF.
Recording
*5330/16-22/EN 1/21/03, 9:56 PM20