4 EN
Before applying the power
4
¢
+ +
+
6 m
POWER
RCVR

Operation

When the STANDBY indicator is lit, the power turns ON when you press
the POWER RCVR key on the remote control. When the power comes
ON, press the key you want to operate.
• When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
Notes
1. The supplied batteries may have shorter lives than ordinary batteries
due to use during operation checks.
2.When the remote-controllable distance gets shorter than before,
replace both batteries with new ones.
3.Placing the remote sensor in direct sunlight, or in direct light from a
high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to
prevent malfunction.
Preparing the remote control

Loading the batteries

1Remove the cover. 2Insert the batteries.
3Close the cover.
• Insert two AA-size (R6) batteries as indicated by the polarity markings.
Operating range
(Approx.)
Remote sensor
Infrared ray system

Channel space switching

(Except for the U.S.A., Canada and Australia)
The space between radio channels has been set to the one that
prevails in the area to which the system is shipped. However, if the
current channel space setting does not match the setting in the area
where the system is to be used, for instance when you move from
area 1 or area 2 shown in the following table or vice versa, proper
reception of AM/FM broadcasts cannot be expected. In this case,
change the channel space setting in accordance with your area by
referring to the following table.
Turn the power OFF by pressing the POWER key before moving the
switch level. Move the switch lever to match your area with a small
screwdriver or other pointed tool, then turn the power ON again.
1.
2.
CHANNEL
Space Frequency
Area
U.S.A., Canada and South
American countries
Other countries
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
D
E
E
M
C
H
S
P
50
µ
AM 9k
H
FM 50k
H
DE-EMPHASIS
CHANNEL SPACE
50us
AM 9kHz
FM50kHz
75us
AM 10kHz
FM100kHz
50us
AM 9kHz
FM50kHz
75us
AM 10kHz
FM100kHz
DE-EMPHASIS
CHANNEL SPACE

Memory back up function

Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 1 day.
•Power mode. •SUBWOOFER ON/OFF.
•Input selector settings. •SW RE-MIX ON/OFF.
•Picture output. •Distance setting timer.
•Speaker ON/OFF. •Input mode setting.
•Volume level. •Midnight mode setting.
•BASS, TREBLE, INPUT level. •PRO LOGIC II mode setting.
•TONE ON/OFF. •Broadcast band.
•LOUDNESS ON/OFF. •Frequency setting.
•Dimmer level. • Preset stations.
•MD/TAPE settings. •Tuning mode.
•Listen mode setting. • ACTIVE EQ mode.
•SP SYSTEM. • DSP mode.
•Speaker settings.
*5330/01-07/EN 1/21/03, 9:54 PM4