Kenwood KS-908HT Connections

7 EN
ENGLISH
KS-908HT 1216/02-08/EN
SURRCENTER SURR BACK
/SW
SUB
WOOFER
SPEAKERS (6-8Ω)
FRONT
1. Twist wire’s
conductor
4. Release
3. Insert the
conductor
2. Push
(–) (+) Red
Center speaker
(–) (+)
Gray
(–) (+)
Blue
Speaker terminals
(Amplifier or receiver)
(–) (+) Green (–) (+)
White
Connections
The speaker wires and labels of speakers’ back panel are color-coded to facilitate connection. Connect each wire to the matching-
colored terminal, as shown in the figure.
Be sure to turn off your amplifier before connecting or disconnecting speakers.
Front speakers ➤
➤
1. T he speaker system’s maximum input power is indicated in the specifications. To avoid speaker damage, never run the
speakers at power levels exceeding this limit.
2. This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your
amplifier or receiver is able to work with 8-ohm speakers.
•Never short the (+) and (–) speaker wires together.
•Do not reverse L and R or (+) and (–) connections. Reversal of sides or polarities may result in unnatural, incorrectly positioned
sound.
Surround
speakers
LeftRight
LeftRight
Subwoofer (option)
Wire with white line