Kenwood KTC-HR300 Preset Memory, Preset Tuning, Auto Memory Entry, Select the band, 1Select the band, 1Select the band, 2Open Auto Memory Entry, Press the [4] or [¢] button

Preset Memory

Putting the frequency and channel in the memory.

1Select the bandPress the [FM] or [AM] button.2Select the frequency and channel to put in the memoryPress the [4] or [¢] button.

3Put the frequency and channel in the memory Press the desired [1] — [6] button for at least 2 seconds.

The preset number display blinks 1 time.

On each band, 1 station can be put in the memory on each [1] — [6] button.

Preset Tuning

Calling up the frequency and channel in the memory.

1Select the band

Press the [FM] or [AM] button.

2Call up the frequency and channel Press the desired [1] — [6] button.

⁄

•"Linking" will be displayed for few seconds until it is received.

•When <Receive Mode> (page 4) is set to Digital or Analog, it cannot be received if the setting is differed from the preset.

Auto Memory Entry

Putting a station with good reception in the memory automatically.

1Select the band for Auto Memory Entry Press the [FM] or [AM] button.2Open Auto Memory Entry

Press the [AME] button for at least 2 seconds. Save 6 stations with the best reception in the memory and close Auto Memory Entry.

⁄

• Sub channel of Digital FM cannot be registered.

English 5