Every receivable Channel is checked for 10 seconds.
1Select a scan item from the menu item list.
2Start Channel Scan
Press the [4] or [¢] button for at least 1 second.
The channel scan will start.
3Release it when the channel you want to listen to is received
Press the [4] or [¢] button for at least 1 second, or press
the [MENU] button to release the menu mode.
Channel Scan
Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as
shown below.
Display Operation
"Channel" Normal manual seeking control.
"Preset" Search in order of the channels in the Preset
memory.
This function cannot be used in the category and channel search
mode.
Switching Seek Mode
Putting the channel in the memory.
1Select the preset band
Press the [FM] button.
2Enter Memory mode
Press the [P.M] button for at least 1 second.
"Preset Memory" is displayed.
3Select the channel to put in the memory
Press the [4] or [¢] button.
4Select the preset number
Press the [FM] or [AM] button.
5Put the channel in the memory
Press the [P.M] button for at least 2 seconds.
The preset number display blinks 1 time.
6Repeating steps 3 to 5 and putting the desired channel in the
memory.
On each band, 1 channel can be put in the memory on each [1]
— [6].
7Exit Memory mode
Press the [P.M] button.
•Only the channel number is stored. Category information is not
stored.
•You can set up to 6 memories even on a control unit with 8 preset
buttons.
Channel Preset Memory
— 13—
KTC-SR903(K)English 04.4.20 6:02 PM Page 13