Installation
Installation
1Confirm the mounting position.
2Place template (accessory 8) on Mounting Surface. Mark each location to be drilled.
3Cut the mounting surface.
Remove the template (accessory 8).
Mounting Surface
Template (Accessory8)
•When making a hole in the vessel, check that there is nothing hazardous on the opposite side such as a pipe , or wiring harness, and be careful not to cause scratches or other damage.
•Machine the surface to specified dimensions. Otherwise, the unit might not be secured fully, or damage might result.
NN | NN | |
w | w | |
NN | NN | |
w | ||
w |
| |
NN | NN | |
w | w | |
NN | NN | |
w | ||
w | ||
|
4Attach the packing (accessory 2).
Accessory2
5Attach the Foam Tape (accessory 7).
6Attach the drip shield (accessory 6).
Accessory7
Accessory6
Accessory2
7Secure the main body with screws (accessory 5) and brackets (accessory 4). Orient the brackets with the "INSIDE" arrows facing inward.
8The screws (accessory 5) tightening torque is thing of 0.74 N•m ± 0.24 N•m (7.5
| Accessory4 |
INSIDE |
|
INSIDE | Mounting |
| Surface |
Screw (M4 × 50mm) Washer (Accessory5)
9Attach the side cover (accessory 3).
Accessory3
Remote controller
Refer to the instruction manual of Remote controller.
English 31