Connecting Wires to Terminals
Car fuse box (Main fuse)
Ignition key switch
ACC | Ignition wire (Red) | |
|
|
|
Battery wire (Yellow)
Car fuse box
Ground wire (Black)- (To car chassis)
+–
USB device
(commercially available) USB connector
If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
Battery
| FUSE ( 15A ) | ||
Connect to the vehicle's parking brake detection |
|
|
|
|
|
| |
|
|
| |
switch harness. | Parking sensor wire (Light Green) | ||
PRK SW For the sake of safety, be sure to connect the parking sensor.
Connect to vehicle’s reverse lamp harness when | Reverse sensor wire (Purple/White) |
using the optional rear view camera. |
|
To car light control switch | Dimmer control wire (Orange/White) |
|
To steering remote
To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required.
Connect to the terminal that is grounded when either the telephone rings or during conversation.
To connect the Kenwood navigation system, consult your navigation manual.
Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the
When using the optional power amplifier, connect to its power control terminal.
Steering remote control input (Light Blue/Yellow)
Mute wire (Brown)
Motor antenna control wire (Blue)
Power control wire (Blue/White)
If no connections are made, do not let the cable come out from the tab.
4