⁄
•*Settable Only when zone function is set to Off. See <Zone Control> (page 82).
•If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud.
Equalizer Control
You can set up the equalizer.
1Display Equalizer Control
Touch 
in the "Audio Control Menu" screen (page 80).
2Display the Equalizer screen
1
2
3
1Selects an equalizer curve type. You can select any of the following equalizer curves.
•"Natural"
•"Rock"
•"Pops"
•"Easy"
•"Top40"
•"Jazz"
•"User"
⁄
•"User" can be selected after tone adjustment is carried out. See <Tone Setup> (page 81).
2Selects items to be adjusted for tone curve setup.
If turned "OFF", only Level can be setup for tone curves.
3Displays the Tone curve setup screen. (page 81)
Tone Setup
You can set a Tone curve.
1Display the Tone screen
See <Equalizer Control> (page 81).
2Set the Tone
1
25
36
47
8
9
1Tone curve becomes flat.
2Bass adjustment items are displayed.
3 Middle adjustment items are displayed.
4 Treble adjustment items are displayed.
5 Sets the Center frequency.
6 Sets the level.
7 Sets the Q factor. (Only Bass and Middle can be set)
8 Bass DC Extend settings (Only when Bass is selected)
If turned "ON", it extends the bass center frequency to the low register by approximately 20%.
9 Returns to the "Equalizer" screen.
English 81