Playing a USB device

When connecting a USB device, playback starts automatically.

Removing the USB device

Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to <USB Device Control> (page 41).

¤

• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.

⁄

•If the USB source is selected when a USB device is not connected, "No Device" is displayed.

•When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed.

•Make sure that the USB device is connected firmly.

B

Switches the audio source

The audio source is switched in the following order each time you press the button.

SAT

 

TUNER or HD Radio

Receives FM/AM broadcast. (page 32)

Build-in Disc Player

 

USB device

 

iPod

 

TV

 

VIDEOiPod

 

External TVDisc Player

Plays back the disc inserted in an external player, such as a CD changer (optional accessory).

 

(page 23)

AUXVideoEXT

Outputs a sound signal input to the external AUX terminal (optional accessory).

Navigation

 

Standby

Although nothing is played back, the clock etc are displayed.

⁄

•You cannot switch to a source that is not connected or inserted.

•You can also play audio files, video files, and picture files with the Built-in Disc Player. Refer to <List of playable discs> (page 8) for the type and format of these media.

•It is necessary to set "NAVIGATION Source" of <AV Interface Setup> (page 72) to "On" to add Navigation as an audio source that can be selected with the [SRC] button.

English 15