Connection
USB device (commercially available)
USB device (commercially available)
| Monitor/Player unit | Do not connect. |
USB connector (iPod)
iPod
USB connector
Ignition key switch
Car fuse box |
|
ACC | Ignition wire (Red) |
|
|
| Battery wire (Yellow) |
Car fuse box |
|
|
|
|
|
| |
(Main fuse) | Ground wire (Black) - (To car chassis) | ||
| |||
Wiring harness (Accessory 2)
FUSE ( 5A )
Accessory @
The cable (Accessory 3) is fixed with a chassis using harness band (Accessory @).
+ | – |
Battery
A
Antenna Cord
Accessory 4
Connect to the vehicle's parking brake detection switch harness using the supplied relay connector.
Battery wire (Yellow)
FUSE ( 10A )
Parking sensor wire (Light Green)
A
Ground wire (Black) - (To car chassis)
PRK SW | For the sake of safety, be sure to connect the parking sensor. |
To vehicle's reverse lamp harness
To car light control switch
To steering remote
Connect to the terminal that is grounded when either the telephone rings or during conversation.
To connect the Kenwood navigation system, consult your navigation manual.
Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the
When using the optional power amplifier, connect to its power control terminal.
To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function.
Reverse sensor wire (Purple/White)
Dimmer control wire (Orange/White)
Steering remote control input (Light Blue/Yellow)
Mute wire (Brown)
Motor antenna control wire (Blue)
Power control wire (Blue/White)
External amplifier control wire (Pink/Black)
If no connections are made, do not let the cable come out from the tab.
4