20
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1Select the band for Auto Memory Entry
Touch the [FM] or [AM] button.
2Open Auto Memory Entry
Touch the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in the
memory Auto Memory Entry closes.
Seek Mode
Sets the seeking mode.
Touch the [SEEK] button.
Each time the button is touched the seeking mode
switches as shown below.
Seek mode(display) Operation
Auto seek ("AUTO1") Automatic search for
a station.
Preset station seek ("AUTO2") Search in order of the
stations in the Preset memory.
Manual ("MANU") Normal manual tuning
control.
CRSC (Clean Reception System Circuit)
Temporarily have reception switched from stereo to
mono to reduce multi-path noise when listening to the
FM station.
Touch the [CRSC] button.
Each time the button is pressed CRSC turns ON or OFF.
When it's ON, the CRSC indicator is ON.
Selecting the FM Band
Press/ touch the [FM] button.
Each time the button is pressed/ touched it switches
between the FM1, FM2, and FM3 bands.
Selecting the AM Band
Press/ touch the [AM] button.
Tuning
Press/ touch the [4] or [¢] button.
During reception of stereo stations the "ST" indicator
is ON
Station Preset Memory
Putting the station in the memory.
1Select the band
Press/ touch the [FM] or [AM] button.
2Select the frequency to put in the memory
Press/ touch the [4] or [¢] button.
3Put the frequency in the memory
Touch the [P1] — [P6] button for at least 2 seconds.
On each band, 1 station can be put in the memory on
each [P1] — [P6] button.
Preset Tuning
Calling up the stations in the memory.
1Select the band
Press/ touch [FM] or [AM] button.
2Call up the station
Touch the [P1] — [P6] button.
FM/AM Tuner Control FunctionFMAM
4 ¢
FMAM
6P1P2P3P4P5P
FM3 P1 108.5 M
FM- INFO
Hz
SRC
On Screen Control
MENU
FM
FM3 P1 92.5 M
FM- INFO
Hz
TUNER
TIMANU ST
AM
6P1P2P3P4P5P
12:00IT
CRSC
RDS
PTY
LIST
INFO
Control Screen -1
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 20