Kenwood KVT-M700 - page 45

45
The following messages are displayed when
certain problems are occurring in your system.
Take the recommended actions.
EJECT: No disc magazine has been loaded in the
changer. The disc magazine is not completely
loaded.E01
➪Load the disc magazine properly.
No CD in the unit.
➪Insert the CD.
NO DISC: No disc has been loaded in the disc
magazine.E02
➪Load a disc into the disc magazine.
READ ERROR:No disc has been loaded in the disc
magazine.E04
➪Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down.
The CD is scratched a lot.
➪Clean the CD and load it correctly.
BLANK DISC: Nothing has been recorded on the MD.E10
NO TRACK DISC :No tracks are recorded on the MD, although it
has a title.E11
NO PANEL: The faceplate of the slave unit being
connected to this unit has been removed.E30
➪Replace it.
E-77: The unit is malfunctioning for some
reason.E77
➪Press the reset button on the unit. If the "E-
77" code does not disappear, consult your
nearest service center.
MECHA ERROR : Something is wrong with the disc magazine.
Or the unit is malfunctioning for some
reason.E99
➪Check the disc magazine. And then press
the reset button on the unit. If the "Mecha
Error" code does not disappear, consult
your nearest service center.
E-99: The unit is malfunctioning for some
reason.E99A
➪Press the reset button on the unit. If the "E-
99" code does not disappear, consult your
nearest service center.
HOLD ERROR:The protective circuit in the unit activates
when the temperature inside the automatic
disc changer exceeds 60°C (140°F), stopping
all operation.E0d
➪Cool down the unit by opening the
windows or turning on the air conditioner.
As the temperature falls below 60°C
(140°F), the disc will start playing again.
NO NAME: • Attempted to display SNPS during the
receiving session of the station having no
station name preset.E50
•Attempted to display DNPS during the CD
play having no disc names preset.E51
NO TLTLE: Attempted to display the disc title or track
title while the MD having no MD title is being
played.E53
NO TEXT: • Attempted to display the disc text or track
text while the CD having no CD text is
being played.E54
•Attempted to display text during reception
of the station that isn't sending text
data.E55
WAITING: Radio text data is being received.E56
LOAD: Discs are being exchanged in the Disc
changer.E57
NO ACCESS: After setting it in the Disc Changer, Disc list
Screen was done without having it been
played at least 1 time.E58
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 45