English | 5
Loading and Replacing the battery
1. Use two "R03"/ "AAA"-size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
2. Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
2WARNING
• Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is accidentally
swallowed.
• Do not set the remote control on hot places such as above
the dashboard.
• The provided batteries are intended for use in operation
checking, and their service life may be short.
• When the remote controllable distance becomes short,
replace both of the batteries with new ones.
Cleaning the panel and monitor
When the operator panel and monitor panels are
dirty, wipe and clean them using a soft cloth (such as
a commercially available silicon coated cloth). When
contaminated excessively, clean them using a cloth
dipped in a neutral detergent first, then remove the
detergent using a dry cloth.
Do not use a hard cloth and a volatile chemical (such
as an alcohol). If used, the panel surface may be
scratched or printed letters may be erased.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe
them with a clean soft dry cloth.
Explanation of icons used on this manual
Indicates the key operation on the receiver.
Indicates the button you must touch.
Indicates the key or joystick operation on the
remote controller.
The initial value of each setup is shown.
Gives an additional information or an operation
advice.