Operating instructions
| |
1Switch the POWER key to ON position. | 7 |
POWER
2Turncenter.on the system by using the AV control
• The power indicator on the panel lights up.
3Play a music source.
In case of difficulty
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative.
| Symptom | Cause |
|
| Remedy |
|
|
| ||
| Sound cannot be produced. | • The parallel cord is not connected. | • Connect them properly referring to “System | ||
| (Indicator is off.) |
| connections”. |
| |
| • The speaker cords are | • Turn the power OFF, remove the | ||
|
| and turn the power ON again. | ||
| • The protection circuitry is activated due to | • Switch the power OFF and wait for the internal | ||
| internal temperature rise. | temperature to drop. The unit can be turned | ||
|
| ON and | ||
|
| but the fundamental solution of the problem | ||
|
| is not | possible | unless the unit installation |
|
| (heat | radiation) | condition is corrected. Im- |
|
| prove the unit installation referring to page 4. | ||
|
|
| ||
Sound cannot be produced. | • The speaker cords are not connected. | • Connect them properly referring to “System | ||
| (Indicator lights.) |
| connections”. |
| |
|
|
| ||
| Sound is not produced from one of the | • One of the speaker cord is not connected. | • Connect it properly referring to “System con- | ||
| speakers. |
| nections”. |
| |
|
|
| ||
| Sound from the surround speaker is not | • A speaker cord is not connected. | • Connect it properly referring to “System con- | ||
| produced or very low. |
| nections”. |
| |
|
|
|
|
|
Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform Note the plastic components.