Kenwood MD-MT877W 1, 2

40

Useful Features

– Checking Displays –

To display the playing time of an indi-

vidual track

1Whilst in the stop mode, press the 55

55

5 or

44

44

4 button to display the track number and

track name.

2Press the DISP button to display the play-

ing time for that track.

Each time the 5 or 4 button is pressed, the

playing time of the previous or next track will be

displayed.

Checking the remaining amount of

battery level

The remaining amount of battery level is shown

by the battery indicator ( ) during operation.

●When the battery is completely discharged, the battery

indicator will flash. Recharge the battery or replace the

alkaline battery with a new one.

●When the battery has run completely out, “BATT EMPTY

(LoBATT)” will appear. Then, the power will be discon-

nected automatically.

Notes:

●If you use the battery which you stopped charging half-

way, “ ” may appear. It does not mean that the bat-

tery is completely charged.

●The battery indicator will not correctly display the remain-

ing capacity for approximately 20 seconds after the power

has been turned on.

●When the AC adaptor or a separately available car adap-

tor is used, the battery indicator will not be shown.

●The number of bars shown in the battery indicator may

increase or decrease, depending on the operation be-

ing performed. This is normal.

Track name

Track number

Playing time

Checking Displays (continued)

When the battery

level is high When the battery

level is very low

How to read the battery indicator

Contents

Main Accessories Contents Special Notes Special Notes Warnings Caution Special Notes (continued) Special Notes Notes Precautions Precautions Important Storing the unit Names of Controls and Indicators Page Names of Controls and Indicators (continued) Remote control display panel Names of Controls and Indicators Remote control unit 123 456 78910 Battery Charger Names Setting Charge mode Battery Charger Battery Charger (continued) Removing How to use the Charge / Operation switch Setting the battery charger and hanging the remote control. For use with the AC adaptor. Using with the Rechargeable Battery Charging 1 2 3 Using with the Rechargeable Battery (continued) About the liquid crystal display (LCD) Using with the Rechargeable Battery About charging time Using with the AC Adaptor 1 Using with the AC Adaptor 2 3 Using with the Alkaline Battery 1 2 3 Hold Function Hold Function Inserting a MiniDisc 1 partment door. 2 3 4 Inserting a MiniDisc Connections Connections To connect to a stereo system with LINE OUT or AUDIO OUT sockets Connections DIGITAL OUT Connections (continued) To connect to a stereo system with a DIGITAL OUT or OPTICAL OUT socket Page 2 3 6 4 7 About the TOC To interrupt recording Press the 06 button. To stop recording Press the / :OFF button. To update the recorded contents of the MiniDisc Press the / :OFF button whilst in the stop mode. Helpful tip when attaching a label To prevent recorded MiniDiscs from be- ing erased accidentally About sampling rate converter Note for digital recording Playback 1 Playback (continued) 2 3 4 Playback (continued) Volume control Press the VOL+ button to increase the volume and the press the VOL button to decrease the volume. Bass control To locate the desired portion Advanced Playback Advanced playback (continued) Intro play Advanced playback (continued) Random play or repeat play To play at double speed Advanced Recording 2 Playback sound-actuated recording (Synchronised recording) 3 4 Page 1 2 Long-play recording About the recording mode Caution for 4 times long recording (LP4) About ATRAC To create your own track numbers Recording tracks as a single track About track numbers Silence To record from a microphone 1 2 Recording from a Microphone 6 3 2 3 4 5 Recording from a Microphone (continued) 1 2 Recording from a Microphone (continued) Checking Displays Checking Displays To check the remaining recording time and the total playing time Whilst in the stop mode, press the DISP button. To check the elapsed time and remaining time of the track During playback, press the DISP button. 1 2 Checking the remaining amount of battery level Checking Displays (continued) Changing Default Settings Changing Default Settings 1 4 3 2 Changing Default Settings (continued) Beep sound Auto play Auto power save Digital recording level Titling a MiniDisc Creating disc and track names 1 Disc name Track name 2 7 tered, press the EDIT button. 8 Page 1 2 3 Stamping titles from another MiniDisc Titling a MiniDisc (continued) Page Editing a Recorded MiniDisc Page To move a track 1 Editing a Recorded MiniDisc 2 3 5 Listening to a MiniDisc Through a Stereo System or a Car Stereo Listening through a stereo system Listening through a car stereo Other Features and Caution Resuming auto play Other Features and Caution Rechargeable battery MiniDisc System Limitations MiniDisc System Limitations Error Messages Error Messages (CantLOCK) ERROR MESSAGES BATT EMPTY (LoBATT) Error Messages (continued) (? DISC) ERROR MESSAGES NO DISC NO SIGNAL (noSIG.) Troubleshooting Troubleshooting Maintenance Troubleshooting (continued) If trouble occurs Maintenance Moisture condensation Specifications Specifications Specifications Specifications (continued)