CONTROLS AND FUNCTIONS
■Front Panel
q | w e r t | |
| CH/STATUS |
|
|
| VOLUME |
TX | BUSY | POWER |
| ||
|
| MIC |
qSpeaker
wCH/STATUS Display
Two
eVOLUME control
Rotate to adjust the audio.
rPOWER switch
tPOWER indicator
Lights green when power is supplied to the DC 13.2V jack.
o i u y
yMIC jack
Connect a microphone to this
uProgrammable Function keys
Press these keys to activate their programmable functions.
iBUSY indicator
Lights green while a signal is being received.
oTX indicator
Lights red while transmitting.
■Rear Panel
q w | e r t | ||
|
| REF IN | RX IN |
TX OUT | CONTROL |
|
|
| I / O |
|
|
|
| FUSE 15A | |
|
| DC 13.2V | |
TEST/SPKR |
|
|
|
|
| N SYNC | |
i | u y |
qTX OUT jack
Connect a TX antenna or a duplexer to this receptacle.
wCONTROL I/O jack
Connect a repeater controller or a remote panel to this DB‑25 interface.
eREF IN jack
Connect to a 10 MHz external oscillator.
rRX IN jack
Connect an RX antenna or a duplexer to this BNC receptacle.
tFUSE
Insert 15 A blade fuse into this fuse holder.
yDC 13.2V jack
Connect a 13.2 V DC power supply to this jack.
uN SYNC 1 / 2 jack
This jack is currently not used. Future functions include connecting another repeater or optional device.
iTEST/SPKR jack
Test input/output jack. Connect an external speaker to this jack.
REPEATER OPERATION
Note: Please consult your dealer for programming the repeater.
When power is applied to the unit, the POWER indicator lights:
・Green when using the DC jack.
Rotate the VOLUME control to adjust the audio.
The BUSY indicator lights green while receiving a signal and the TX indicator lights red while transmitting.
TRANSCEIVER OPERATION
■Receive
Adjust the volume to your desired level. You may need to readjust the volume if you are having interference while receiving a message from your dispatcher or another member in your fleet.
The BUSY indicator lights green while a signal is being received.
■Transmit
1Listen to the channel before transmitting, to make sure it is not being used.
2Press the microphone PTT switch, then speak in your normal speaking voice.
The TX indicator lights red while transmitting.
3When you finish speaking, release the PTT switch.
