Safety First
Please read these safety instructions carefully. They can help prevent electrical shock, fire, and damage to the unit.
Safety Symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
We’ve placed these safety symbols on the back of
2. Protect your unit from moisture. |
Don’t place your unit near water— |
for example, a bathtub, kitchen sink, |
laundry tub, wet basement, or near |
a swimming pool. |
3. Keep your unit out of extreme |
hot and cold. Your unit may not |
work properly if it is used at |
extremely low or freezing tempera- |
tures. Don’t place your unit near |
6.To clean, use a clean, dry cloth. To avoid damage, NEVER use volatile solvents such as alcohol, paint thinner, gasoline, benzene, etc. to clean the cabinet. If this is an
will state this), it is not subject to these problems.
9.Do NOT place the unit on an unstable cart, shelf, stand, tripod, bracket, or table. if you mount the unit, follow the instructions in the manual and, if possible, use a mounting bracket recommended for the unit. If you place the unit on a moveable cart, use caution when moving the cart to avoid overturn- ing it.
Additional safeguards for elec-
power outlet, and at the point they connect to the unit.
4.Each unit is equipped with a polarized power plug (with one blade wider than the other) that only fits one way into an electrical outlet, as a safety feature. If you cannot fit the plug into your electri- cal outlet, try turning the plug over. If it still doesn’t fit, you may need to have an electrician replace your outlet with a new one that is UL- approved.
5.Each unit has ventilation open- ings to keep it from overheating. Do NOT cover or block these open- ings. Place the unit at least 6 in from the wall so that it is properly venti- lated.
6.Before a lightning storm or when you leave the unit unattended and unused for long periods of time, unplug it from the wall outlet and any antenna or cable. This can prevent damage to the unit from lightning and
because there are operating electrical parts inside that can cause electrical shock. If the unit needs servicing, take it to qualified service
Safety Precautions
For all units
1.Dispose of the packaging materi- als properly. After you take the unit out of its shipping bag, dispose of the bag, keeping it out of the reach of children and animals. Be aware that the bag could cause suffocation.
radiators, heat registers, stoves, or |
other heat sources. |
4.Don’t put objects or liquids into the unit! NEVER permit children to put anything into the unit.
5.NEVER try to open the unit or take it apart.
7.Do NOT attempt to service this unit. You should take the unit to qualified service personnel for repair when:
•Objects have fallen or liquids have been spilled into the unit
•The unit has been exposed to moisture
•The unit doesn’t appear to oper- ate normally or exhibits a marked change in performance
•The unit has been dropped or the case has been damaged
8.To prevent distortion (and in some cases, discoloration of TV pictures), keep the unit away from sources of magnetic fields, such at TVs, radios, motorized toys, or magnetized objects. If the unit is
1.If you see smoke or smell anything unusual near your unit, turn off the entire system immediately, and unplug it from the wall. Then contact your Kenwood dealer or nearest service center.
2.Only connect the unit to a power supply that matches that described in the technical specifica- tions in the back of the manual that came with it. If you are not sure of the type of power supply in your home, ask your Kenwood dealer or your local power company for help. To avoid the possibility of fire or electrical shock, do NOT overload the electrical outlet or any extension cords.
3.Place the power supply cords in such a way that they will not be walked on or pinched by items placed against them. Never pull or stretch power cords, and use special care with the cords at the plugs, in a
Specifications:
Type | Subwoofer system with |
| |
Amplifier |
|
Power handling | 50 watts RMS into 4 ohms, from |
| 20 Hz to 200 Hz, with no more |
| than 0.04% total harmonic distor- |
| tion |
Phase switching | Normal, Reverse |
Input sensitivity and input impedance | |
50 mV (10 | |
1.0 V (4.7 | |
Supply voltage | AC 110 V ~ 120 V |
Rated power consumption | 60 watts |
Speaker |
|
Enclosure | Vented |
Speaker units | 8 in (200 mm) |
Nominal impedance | 4 ohms |
Width | 13 in (330 mm) |
Height | 13 in (330 mm) |
Depth | 13 in (330 mm) with grille |
Net weight | 25 lbs |
Supplied accessories | Feet (4) |
Since Kenwood follows a policy of continuous advancement in devel- opment, these specifications may change without notice.
6. | 7. |