7 KeypadUse the keypad to perform the following operations. Additionally, you can use the 10-key keypad for direct frequency entry and manually transmitting DTMF tones.Key name Press Operation Ref. page
[F] A
[KEY] To enter MHz tuning mode.
To turn the Function ON. 11
[F] - [KEY] To turn the Function OFF. –
[KEY] (1s) To turn the Lock function ON and OFF. 14
[VFO] B
[KEY] To enter VFO mode. 11
[F] - [KEY] To copy the current Memory channel or Call
channel to the VFO (memory shift). 24
[KEY] (1s) To start Band scan. 26
[MR] C
[KEY] To enter Memory Channel mode. 18
[F] - [KEY] To store the current operating frequency in the
Memory channel. 19
[KEY] (1s) To start Memory scan 28
[CALL] D
[KEY] To select the Call channel.
23
[F] - [KEY] To store the current operating frequency to the
Call channel.
[KEY] (1s) To start CALL scan. 28
[MENU] 1 [KEY] To enter Menu mode. 15
[TONE] 2 [KEY] To select the Signaling (Tone, CTCSS, DCS or
Cross tone) function.
32, 36,
37, 39
[LOW] 3 [KEY] To select an Output power. 12
[SQL] 4 [KEY] To enter Squelch Level Adjustment mode. 10
[T.SEL] 5
[KEY] To enter the Tone frequency, CTCSS
frequency or DCS code setup mode. 32, 36,
37, 39
[KEY] (1s) To start Tone frequency, CTCSS frequency or
DCS code scan.
[] 6 [KEY] To enter the Tone Alert function setup mode. 44
[SHIFT] 7 [KEY] To select an Offset direction. 31
[REV] 8 [KEY] To turn the Reverse function ON or OFF. 34
[PF] 9 [KEY] To activate the Program function. 52