save both time and expense (requires optional programming cable and software).

Power Output Settings

Programmable power levels provide one of two settings (High/Low) for each of the channels so the radio can be tailored for mixed transmit range requirements. Output levels can be programmed at 5W/1W on VHF and 4W/1W on UHF.

ANI Function

Two types of ANI - PTT ID (per channel) and DIAL ID - send connect and disconnect ID information. Repeater/RIC access is enabled through key operation or ID transmit with PTT set to On.

Scan With Priority

Channel scanning provides users with an easy way to monitor multiple channels for activity. Priority Scan enables the radio to automatically check for activity on an important main channel during the channel scan sequence and while receiving a call on another non-priority channel. Multi-group and single group scans are available to limit scanning to the currently selected group or to scan all channel groups.

Dead Beat Disable (D.B.D.)

Useful when functions of the radio need to be rendered unusable, reception of a pre- determined DTMF signal can either disable the units' signal transmission, or prohibit signal transmission, while muting signal reception volume.

Embedded Message

The radio's flash memory can store an electronic message containing owner identification, property I.D. numbers, user and department names, service records, etc. A radio can be electronically identified even if external labels, markings or factory serial numbers have been removed.

SmarTrunk™ Omni Board Compatable

Expand to conventional and conventional system capacity with the OMNI board, available from the SmarTrunk™ Corporation.

Back to Top

Page 5
Image 5
Kenwood TK-372G Power Output Settings, ANI Function, Scan With Priority, Dead Beat Disable D.B.D, Embedded Message