Manuals / Kenwood / Marine Equipment / Marine Radio

Kenwood TK-5710 Preparation, Following tools are required for installing the transceiver

Models: TK-5710 TK-5710H

1 41
Download 41 pages 58.22 Kb
Page 7
Image 7

PREPARATION

Various electronic equipment in your vehicle may malfunction if they are not properly protected from the radio frequency energy which is present while transmitting. Electronic fuel injection, anti-skid braking, and cruise control systems are typical examples of equipment that may malfunction. If your vehicle contains such equipment, consult the dealer for the make of vehicle and enlist his/her aid in determining if they will perform normally while transmitting.

Note: The following preparation instructions are for use by your KENWOOD dealer, an authorized KENWOOD service facility, or the factory.

TOOLS REQUIRED

Note: Before installing the transceiver, always check how far the mounting screws will extend below the mounting surface. When drilling mounting holes, be careful not to damage vehicle wiring or parts.

The following tools are required for installing the transceiver:

•1/4 inch (6 mm) or larger electric drill

•5/32 inch (4.2 mm) drill bit for the self-tapping screws used to mount the optional mounting bracket

•Circle cutters

POWER CABLE CONNECTION

◆The transceiver operates in 12 V negative ground systems only! Check the battery polarity and voltage of the vehicle before installing the transceiver.

◆Use only a KENWOOD optional DC power cable.

◆Do not cut and/or remove the fuse holder on the DC power cable.

1 Check for an existing hole, conveniently located in the firewall, where a power cable can be passed through. If no hole exists, use a circle cutter to drill the firewall, then install a rubber grommet.

2Run the two power cable leads through the firewall and into the engine compartment, from the passenger compartment.

3Connect the red lead to the positive (+) battery terminal and the black lead to the negative (–) battery terminal.

• Locate the fuse as close to the battery as possible.

4Coil and secure the surplus cable with a retaining band.

•Be sure to leave enough slack in the cables so the transceiver can be removed for servicing while keeping the power applied.

2

Page 6 Page 8
Page 7
Image 7
Kenwood TK-5710H instruction manual Preparation, Following tools are required for installing the transceiver
Page 6 Page 8

TK-5710, TK-5710H specifications

The Kenwood TK-5710H and TK-5710 are versatile and robust two-way radio transceivers, designed with the needs of modern communication in mind. These models stand out in the crowded market of professional radios, providing reliable performance across various applications, including public safety, construction, transportation, and event management.

One of the most notable features of the TK-5710H and TK-5710 is their exceptional versatility. Operating in the VHF (TK-5710) and UHF (TK-5710H) bands, these radios support a wide range of frequencies, allowing users to communicate effectively in various environments. The TK-5710H, operating in the UHF band, is particularly advantageous in urban settings where higher frequency signals can penetrate obstacles more easily, making it ideal for crowded and complex landscapes.

Both models offer 128 memory channels, which allow users to store and select frequencies effortlessly, improving flexibility during operations. Additionally, they are equipped with a powerful 5 watts of output power, ensuring a clear and strong communication signal even over long distances. The built-in advanced digital signal processing (DSP) technology enhances audio clarity, providing users with sharp, intelligible sound quality, even in noisy conditions.

Safety features are a cornerstone of the TK-5710H and TK-5710. Each radio incorporates an emergency alert button, which enables users to send a distress signal to a designated group or base station, ensuring quick assistance when needed. Furthermore, the radios boast enhanced encryption capabilities, which secure communications, preventing unauthorized access and ensuring operational confidentiality.

The ergonomic design of the TK-5710H and TK-5710 enhances user experience. Their compact and lightweight build makes them easy to carry and operate, while the intuitive interface facilitates quick access to functions even in high-pressure situations. The clear LED display and backlit buttons further improve usability, enabling users to operate the radios in low-light conditions.

In terms of durability, both models are constructed to withstand harsh environments. They meet military standards for shock, vibration, and water resistance, making them reliable companions even in extreme conditions.

In summary, the Kenwood TK-5710H and TK-5710 are powerful, versatile, and reliable two-way radios designed for professionals who require top-notch communication solutions. With advanced features, comfortable handling, and robust construction, these radios are well-suited for a variety of demanding applications. The combination of cutting-edge technology and user-oriented design ensures they will meet and exceed the expectations of today’s communication needs.