Repeater Specifications
|
| TKR - 9300S |
| TKR - 9301S |
|
GENERAL |
|
|
|
|
|
Frequency Range | RX: | 806.0125 ≈ 820.9875 MHz | RX: | 896.0125 ≈ 900.9875 MHz |
|
| TX: | 851.0125 ≈ 865.9875 MHz | TX: | 935.0125 ≈ 939.9875 MHz |
|
|
|
|
|
|
|
Number of Channels | 1 |
| 1 |
|
|
Channel Spacing | 25 kHz (PLL step: 12.5 kHz) | 12.5 kHz (PLL step: 12.5 kHz) |
| ||
Input Voltage | 115/230 VAC, 47– 63Hz | 115/230 VAC, 47– 63Hz |
| ||
Duty Cycle | 100% |
| 100% |
|
|
RECEIVER |
|
|
|
|
|
Sensitivity (EIA 12 dB SINAD) | 0.3 µV |
| 0.3 µV |
|
|
Selectivity | - 75 dB |
| - 70 dB |
|
|
Modulation Acceptance | ±7 kHz | ±3.5 kHz |
| ||
Spurious and image rejection | - 85 dB |
| - 80 dB |
|
|
Intermodulation | - 70 dB |
| - 70 dB |
|
|
Frequency Stability | ±0.00015% | ±0.00001% |
| ||
TRANSMITTER |
|
|
|
|
|
RF Power Output | 30, 80, 130 Watts | 130 Watts |
| ||
Frequency Stability | ±0.00015% | ±0.00001% |
| ||
RF Output Impedance | 50 Ω |
| 50 |
|
|
Modulation | 16KOF1D, 16KOF3E | 11KOF1D, 11KOF3E |
| ||
Audio Distortion | Less than 2% | Less than 5% |
| ||
Base Station Specifications
| |
GENERAL |
|
Frequency Range |
|
Type 1 | 29.7 ≈ 37.0 MHz |
Type 2 | 35.0 ≈ 43.0 MHz |
Type 3 | 40.0 ≈ 50.0 MHz |
Number of Channels | 160 |
Channel Spacing |
|
Wide | 20 kHz (PLL step: 5 kHz) |
Narrow |
|
|
|
Input Voltage | 115/230 VAC, 47 ≈ 63Hz |
Duty Cycle | 100% |
RECEIVER |
|
Sensitivity |
|
12db Sinad | 0.25 µV |
20db Quieting | 0.35 µV |
Selectivity |
|
Wide | 85 dB |
Narrow |
|
Spurious Response | 90 dB |
Audio output | 13 watt at 4 Ohm |
Band Spread |
|
Type 1 | 7.3 MHz |
Type 2 | 8 MHz |
Type 3 | 10.0 MHz |
| |
TRANSMITTER |
|
RF Power Output | 100 W |
Type of emission: |
|
Wide | 16KOF3E |
Narrow |
|
Spurious Response | 80 dB |
FM hum and noise |
|
Wide | 55 dB |
Narrow |
|
Audio Distortion | < 2% at 1000 Hz |
Band Spread |
|
Type 1 | 7.3 MHz |
Type 2 | 8.0 MHz |
Type 3 | 10.0 MHz |
|
|
Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice.
All rights reserved. Kenwood USA Corporation is committed to a policy of constant improvement in features, quality and performance. To accommodate these improvements, all technical information and specifications are subject to change without notice. Custom options and configurations are available, if needed. For more information, call
ADS#01405 Printed in USA
