15
■Switching Power ON/ OFF
Press the POWER switch to switch the transceiver ON (or OFF)
•The display backlight illuminates when the power is switched ON.
■Adjusting the Volume
Turn the VOL control clockwise to increase the volume, and counterclockwise
to decrease it.
■Selecting a Group
Press the Group Up or Group Down keys, or use the CH control (depending
on which one is programmed with the group functions).
•Pressing Group Up or Group Down will increase or decrease the group selection.
•Turning the CH control clockwise will increase the group selection, and turning it
counterclockwise will decrease the selection.
■Selecting a Channel
Press the Channel Up or Channel Down keys, or use the CH control
(depending on which one is programmed with the channel functions).
•Pressing Channel Up or Channel Down will increase or decrease the channel
selection.
•Turning the CH control clockwise will increase the channel selection, and turning it
counterclockwise will decrease the selection.
■Making a Call
1Select the desired group and channel (above).
•Make sure the channel is not in use. If the channel is in use, the BUSY (green)
indicator will light; wait until the channel is no longer in use.
2Press the PTT switch, then speak into the microphone in your normal
speaking voice.
•For best results, hold the transceiver approximately 3 to 4 cm (1 1/2 inches)
from your lips.
3Release the PTT switch to receive.
4Replace the microphone on the hanger when the call is finished.
BASIC OPERATIONS