Options
■ | ■ | ■ | ■ |
|
Control Station | Accessories Connector | Mounting Case | Line Noise Filter |
|
Desktop Microphone | Cable |
|
|
|
■ | ■ | ■ | ■ |
|
Key Lock Adapter |
| |||
Microphone | PC Serial Interface |
| ||
| PA/HA Unit |
| ||
Cable |
|
| ||
|
|
|
| |
■ |
| ■ |
|
|
Microphone | ■ | ■ |
| |
■ | Mounting Case |
| ||
External Speaker |
| Mobile Data Terminal |
| |
Keypad Microphone |
|
|
|
|
|
|
|
| |
| ■ | ■ | ■ |
|
■ | DC Power Supply | GPS Receiver / | ||
External Speaker | Modem Unit |
| ||
Ignition Sense Cable |
| |||
|
|
| ||
|
|
|
|
|
Specifications
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Model | ||
GENERAL |
|
|
Frequency Range |
|
|
Type 1 (RX) | 851~870 MHz | 935 ~ 941 MHz |
Type 2 (TX) | 806 ~ 825 MHz, | 896 ~ 902 MHz, |
Type 3 (Talk Around) | 851 ~ 870 MHz | 935 ~ 941 MHz |
Systems |
| Max. 32 |
Group | Max. 250 per system | |
Channels |
|
|
LTR® Mode |
| Max. 600 |
(Conventional) |
| Max. 250 |
PLL Channel Spacing | 25 kHz | 12.5 kHz |
| (PLL step: 12.5 kHz) | |
Operating Voltage | 13.6 V DC ± 15 % | |
Current Drain |
|
|
Standby |
| Less than 0.4 A |
Receive |
| Less than 1.0 A |
Transmit |
| Less than 7.0 A |
Duty Cycle |
| Transmit: 20% |
Operating Temperature | ||
Range | ||
Frequency Stability |
| ±0.00015% |
|
Model |
RECEIVER (Measurements made per
Sensitivity (12 dB SINAD) | 0.25 µV |
|
Selectivity* | 75 dB | 68 dB |
Intermodulation Distortion | 70 dB | 65 dB |
Spurious Response* | 80 dB |
|
Audio Output | 4 W with less than 5% distortion | |
Channel frequency spread | 19 MHz | 6 MHz |
TRANSMITTER (Measurements made per |
| |
RF Power Output | 15 W |
|
Spurious & Harmonics | 60 dB |
|
Modulation | 16KØF3E | 11KØF3E |
FM Noise | 45 dB | 40 dB |
Audio Distortion | Less than 3% | Less than 5% |
Microphone Impedance | Low Impedance |
|
Channel Frequency Spread | 64 MHz | 45 MHz |
* Typical specifications
Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice.
FleetSync® is a registered trademark of Kenwood Corporation.
LTR® is a registered trademark of Transcrypt International.
Antenna Impedance | 50 Ω |
|
Dimensions (W x H x D) | ||
Weight (net) | 2.07 lbs. (940 g) |
|
FCC ID | ALH24563110 | ALH24572110 |
IC Certification | 282195546A | 282195545A |
Applicable MIL-STD
Standard | MIL 810C | MIL 810D | MIL 810E | MIL 810F |
| Methods/Procedures | Methods/Procedures | Methods/Procedures | Methods/Procedures |
Low Pressure | 500.1/Procedure I | 500.2/Procedure I, II | 500.3/Procedure I, II | 500.4/Procedure I, II |
High Temperature | 501.1/Procedure I, II | 501.2/Procedure I, II | 501.3/Procedure I, II | 501.4/Procedure I, II |
Low Temperature | 502.1/Procedure I | 502.2/Procedure I, II | 502.3/Procedure I, II | 502.4/Procedure I, II |
Temperature Shock | 503.1/Procedure I | 503.2/Procedure I | 503.3/Procedure I | 503.4/Procedure I, II |
Solar Radiation | 505.1/Procedure I | 505.2/Procedure I | 505.3/Procedure I | 505.4/Procedure I |
Humidity | 507.1/Procedure I, II | 507.2/Procedure II, III | 507.3/Procedure II, III | 507.4 |
Sand & Dust | 510.1/Procedure I | 510.2/Procedure I | 510.3/Procedure I | 510.4/Procedure I, III |
Vibration | 514.2/Procedure VIII, X | 514.3/Procedure I | 514.4/Procedure I | 514.5/Procedure I |
Shock | 516.2/Procedure I, II, III, V | 516.3/Procedure I, IV, V | 516.4/Procedure I, IV, V | 516.5/Procedure I, IV, V |
footnotes from Front:
1Trunked Format: 32 Systems max. (prog. for LTR® or Conventional), 250 Groups per system max (limited per repeater channels programmed).
2DTMF Encode includes PTT ID, Emergency ANI, Manual Encode
3Ignition sense requires
4Public Address / Horn Alert Option- requires
5
6Kenwood LTR® Features:
7FleetSync® (not FleetSync® II capable)
8Short Text Messages are radio stored & LCD displayed.
ADS#44307 Printed in USA