36
Using PowerTouch
How Do I Operate Devices?
Controlling a device without altering the receiver's input selection
(Operations using the SHIFT button):
The transmission of operation signals from PowerTouch to the receiver
can be disabled with the HOME1 or HOME2 menu. This makes it pos-
sible, for example, to turn the VCR ON while listening to a CD.
Procedure:
1. Touch (HOME1) or (HOME2) in the Quick Access menu to
display the HOME1 or HOME2 menu.
2. Touch button.
3. Touch the desired operation button within 3 seconds after above.
By touching the SHIFT button and executing an operation, any device
can be controlled without sending the command signal to the receiver.
The above operation is not available with devices connected using
the KENWOOD system control cable.