42
Using PowerTouch
How Do I Operate Devices?
3. Touch . This accesses the disc mode commands:
4. If you haven’t already done so on the CD changer, touch .
This reads all of the disc and track title information into the CD
changer’s memory.
5. Set PowerTouch down so that its IR transmitter window is aiming at
the receiver’s IR transmitter window. Select . Do not move
PowerTouch while it is reading data.
This process may take some time, depending on how many CDs you
have loaded. When the IR light on the receiver goes out, the receiver
is done sending the information to PowerTouch, and you may move
PowerTouch again. PowerTouch’s memory now contains the disc titles
of every CD in the changer with title information.
6. Touch to return to the CD controls.
To read the loaded track titles and store them in PowerTouch:
1. Make sure you have followed the previous instructions to read disc
data.
2. Touch (HOME1) on Quick Access menu.
3. Touch .
4. Touch . This accesses the disc mode commands