Kenwood Z828MP Playing CDs

Playing CDs:
A press of the release button causes the faceplate to drop to
the front, thereby exposing the CD slot.
Holding the CD with the labeled side facing up, insert it in the
slot. The CD will start playing.
Push back the faceplate with your hand until it locks.
The IN indicator will light when a CD has been inserted.
When inserting a CD, make sure the CD has been completely
drawn in before pushing back the faceplate. Failing to do so
might scratch the CD.
Playing CDs Already Inserted:
Press the SRC button repeatedly until the CD mode is
obtained.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.
Pausing and Restarting CD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the release button and drop open the faceplate.
Press the 0button located near the CD slot.
The CD stops playing and ejects from the slot.
Push back the faceplate with your hand until it locks.
• Do not attempt to insert a CD into the slot if another one is
already there.
2CAUTION
2CAUTION
Playing CDs
CD/External disc control features
— 28 —
English
LOUD
AUD
DISP NAME.S MENU NF
2ZONE
DAB
PWR
OFF
DISP/
NAME.S
SRC DISC+
4
DISC-
SCAN
RDM
REP M.RDM
38
¢
Track number Track time
Disc title/Track title/DNPS
IN indicator
Disc number
Release button
Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 14) to
"... + Function indicator".