Instructions for Assembly
■Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.
■Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.
■The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if pos- sible technically talented.
■Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine.
■Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
■The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment.
■Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resis- tance is felt, then use spanner to finally tighten nuts com- pletely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function cor- rectly (the locking device is destroyed), and must be replaced.
■For technical reasons, we reserve the right to carry out prelim- inary assembly work (e.g. addition of tubing plugs).
■Nobody may be in the moving range of a training person during training.
List of spare parts page 30-32
When ordering spare parts, always state the full article number,
Example order: Art.no.
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).
GB KETTLER (GB) Ltd.
Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
http://www.kettler.co.uk
USA KETTLER International Inc.
1355 London Bridge Road · Virginia Beach · Virginia VA 23453 USA
http://www.kettlerusa.com
5
