Kettler 2555 manual Adirondack Footrest, Contents Tools Required, Assembly Instructions

2555 ADIRONDACK FOOTREST

Contents:		Tools Required:
(1)	Footrest Bed	#3 Phillips Head Screwdriver
(2) legs		7/16” Wrench
(1)	Cross Brace	Locknut Washer	1/4-20 x 2” Bolt
(6)	1/4 - 20 x 2” Bolts
(4)	Washers
(4)	Locknuts
Assembly Instructions
1. Align leg to predrilled holes and insert 1/4-20 x 2” bolts
then clean any plastic residue from the bolt. Slide on washers and
tighten the locknuts with the 7/16” wrench. Repeat to attach the
leg on the other side.
2. Place the cross brace between the legs aligning the predrilled				2.	Align holes then insert the
					1/4 - 20 x 2” bolts.
holes on the end of the cross brace and the footrest legs. Insert
a 1/4-20 x 2” bolt and tighten with phillipshead screwdriver to
secure. Repeat to attach the brace on the other side.

Align holes then insert the 1/4 - 20 x 2” bolts.

1.

Slide washer onto end of bolt, then attach and tighten the locknut.

Properly Seated

Washer and Locknut.

Copyright © Kettler USA 309.01

Made in the U.S.A. www.kettlerusa.com info@kettlerusa.com