Kettler manual 2610 36” x 72” DINING TABLE, Assembly Instructions, Contents, Tool Required

2610 36” x 72” DINING TABLE

Contents:		(16) 1/4 - 20 x 2 1/2” Bolts
(4)	Legs	(4) 1/4 - 20 x 3” Bolts
(2)	Side Braces	Tool Required:
(2) Table feet
(1) Table Top		#3 Phillips Head Screwdriver

Assembly Instructions 1.

1. With the curved side facing out align the table leg with the predrilled hole on the foot of the table and insert a 1/4 - 20 x 3” bolt then tighten with the phillips screwdriver.

Repeat on the other end, do both sets.

	2.	Place the leg with foot
2.
	inside the frame underneath the
	tabletop. Align the predrilled
	holes, insert two 14 - 20 x 2 1/2”
	bolts then tighten them with the
	phillips screwdriver.		Align the predrilled holes on the leg
	Repeat on the other leg, do both sides.		with the metal insert on the frame,
			insert the bolt.

3. Place the side support braces vertically between the legs aligning the predrilled holes. Insert two 1/4-20 x 2 1/2” bolts thru the hole into the center brace then tighten them with the phillips screwdriver.

3. Repeat on the other brace, do both sides.

	Made in the U.S.A.
	www.kettlerusa.com
Copyright © Kettler USA 309.01	info@kettlerusa.com