Kettler 7136-000-500, 7176-000-090-500 manual Jbar Support Leg

Assembly

Step 10

Jbar

Support Leg

Important: have two people complete steps 10-12. With assistance, lift one table top onto the wheelbase; the legs will be facing outward. Have one person support the top while it is resting on the base while the other completes assembly.

Assemble crossbar to Jbars and support leg in the order shown. Note: a Jbar with safety lever should be assembled on the right side (side with non locking wheels) and a Jbar without lever on the left side (side with locking wheels). The support leg is always assembled closest to the wheelbase. You may need to lower table slightly to line up the bolt holes. Do not fully tighten the bolts until both ends are assembled.

2 Required

m8x45

Support Leg

Jbar

Wheelbase

A

D

Support Leg

Jbar

G

2 Required	2 Required	2 Required
dia 16x8	m26x19x6	dia 30x8

BC

Jbar

EF

16