Owner’s Manual
Over tightening of the
belt will severely shorten
28
the life of the belt and may cause further damage to other components.
If you place your feet on the belt and feel a slipping sensation, then the belt has stretched and is slipping across the rollers. All belts will stretch over time. This is a normal and common
CAUTION!
RUNNING BELT CENTERING ADJUSTMENT:
When you run or walk, you may push off harder with one foot than the other. This will cause the running belt to run off center. This treadmill is designed and built to ensure proper tracking of the belt is always centered on the deck. Occasionally the belt may need further adjustment to keep it centered. To center the belt, use the enclosed Allen wrench to adjust the rear roller position.
BELT CENTERING PROCEDURES:
1. DO NOT wear loose clothing, neckties or loose jewelry while making this adjustment.
2. NEVER turn the bolt more than 1/4 turn at a time.
3. Always tighten one side and loosen the other to prevent over tightening or over loosening the belt.
4. Run the treadmill. Adjust belt while the treadmill is running at 4 Mi/H (6.4 Km/H) with no person on the belt.
After making the adjustment, walk on the belt for five minutes to test. If necessary, repeat the procedure but NEVER turn the bolts more than 1/4 turn at a time. Over tightening the belt can significantly shorten the belt life.
IF BELT TOO FAR TO THE LEFT SIDE:
1. Turn the left roller bolt 1/4 turn clockwise (tighten)
2. Turn the right roller bolt 1/4 turn counterclockwise (loosen)
IF BELT TOO FAR TO THE RIGHT SIDE:
1. Turn the right roller bolt 1/4 turn clockwise (tighten)
2. Turn the left roller bolt 1/4 turn counterclockwise (loosen)
RUNNING BELT TENSIONING ADJUSTMENT:
Use of solvents can reduce critical lubrication
To reduce the risk of electrical shock, always
unplug the treadmill NEVER use solvents on the deck or running belt.
from the electrical outlet
of the deck and belt.
immediately after use and before cleaning.
Remove dust on the treadmill with vacuum or slightly damp cloth. Fold up the deck and clean the floor with vacuum periodically will help to prolong the treadmill product life.
DANGER!
CLEANING