Set-Up & First Brew

IMPORTANT: You cannot use your Keurig brewer until it has been primed for its first use as set forth below.

NOTE: If Brewer has been exposed to tempera- tures below freezing, allow Brewer at least two hours to reach room temperature before prim- ing. A frozen or extremely cold brewer will not prime properly and can cause damage.

Please note, a K-Cup®should not be used for the Priming Sequence.

Priming your Brewer

1.Unwrap cord and plug the brewer into a grounded outlet.

2.Ensure Brew/Drain is set to Brew.

3.Place a cup or mug on the Drip Tray Plate.

4.Remove the Water Reservoir from Brewer by first removing Lid from Reservoir, then lifting Reservoir straight up and away from Brewer (may be tight). Rinse with fresh water.

5.Fill Water Reservoir with fresh water so that the water level reaches the line just below the top edge of the clear viewing area. (Be careful not to over fill.)

6.Place Water Reservoir base into the left side of the Brewer and be sure the Water Reservoir Lock Tabs engage

with the Brewer. Replace Lid on Water Reservoir.

7.Press Power Button found on upper right panel of the Brewer. The green light next to the Power Button will become illuminated.

8.The green brew size selector lights on the LED Control Center will flash to indicate the Brewer needs to be primed. Make sure the handle is all the way down before continuing.

9. Press the flashing Brew Button.

NOTE: If the Water Reservoir is empty or not in place on the Brewer, then the blue light next to 'ADD WATER' on the LED Control Center will be illuminated. The Brew Button will not be activated until water is added to the Water Reservoir.

10.The Brewer will automatically fill with water (priming it) and then the water will be heat- ed. This will take less than 5 minutes.

During the heating period the red light next to 'HEATING' on the LED Control Center will become illuminated. Once the water is heat- ed, the red light will turn off.

NOTE: You may see small amounts of water coming from the Vent and dripping into the Water Reservoir during this and subsequent heating – this is normal.

11.Raise the handle, then press the flashing back lit blue Brew Button to start a cleansing brew, during which hot water will flow into your cup or mug. Pour the hot water into the sink.

12.The Brewer will take less than 20 seconds to refill and reheat water between brews during which time the red light next to 'HEATING' on the LED Control Center may be illuminated. When the water has heated, the red light will turn off.

13.The priming process is now complete and you are ready to brew!

6

Page 5 Page 7
Page 6
Image 6
Keurig B145 manual Set-Up & First Brew, Priming your Brewer, Press the flashing Brew Button
Page 5 Page 7

B145 specifications

The Keurig B145 is a high-quality single-serve coffee maker designed for both home and office use. Known for its compact design and user-friendly operation, the B145 stands out for its efficiency and ability to deliver a fresh cup of coffee in under a minute. This coffee maker is part of Keurig’s extensive lineup of brewing systems, and it incorporates several innovative technologies that enhance the brewing experience.

One of the key features of the Keurig B145 is its versatility when it comes to beverage options. It is compatible with all K-Cup pods, allowing users to enjoy a wide range of coffee flavors, tea, hot chocolate, and other specialty beverages. This flexibility makes it an ideal choice for households or workplaces with varying preferences among users. The B145 brewer also offers three cup sizes: 6, 8, and 10 ounces, catering to individual taste and coffee strength preferences.

The design of the B145 prioritizes both functionality and aesthetics. It features a sleek, compact body that can fit comfortably in smaller spaces, yet it retains a professional appearance well-suited for an office environment. The removable water reservoir, with a capacity of 48 ounces, simplifies refilling and makes it easy to keep the unit running smoothly without constant trips to the sink.

In terms of brewing technology, the B145 utilizes a unique brewing system that heats water just before dispensing it through the K-Cup pod. This ensures that each cup of coffee is brewed at the optimal temperature and delivers maximum flavor extraction. Furthermore, the machine features a simple one-button operation, making it easy for anyone to brew coffee without complicated setup or programming.

Maintenance is straightforward with the Keurig B145, thanks to its easy-to-clean parts. The drip tray is removable, allowing for quick cleaning and accommodating larger travel mugs. The brewer also has an auto-off feature that conserves energy by shutting down the machine after a period of inactivity.

In summary, the Keurig B145 is a reliable and efficient coffee maker that combines versatility, user-friendly operation, and advanced brewing technology. Its compatibility with K-Cup pods, compact design, and easy maintenance make it a top choice for coffee lovers seeking convenience and quality in their brew. Whether at home or in a professional setting, the Keurig B145 is sure to satisfy your coffee needs.
Top Page Image Contents