10.Install the new module and connect all of the appropriate connections, hoses, and wires making sure that they are secure and tight.
11.Conduct a BIT test (see appendix VII on page 85) to insure the proper function of the brewer.
NOTE: There is a removable filter screen located in the Inlet Valve. If this screen should become blocked by foreign material preventing water from flowing into the brewer, you can gently remove the blocked screen using a pair of needle nose pliers and insert a new one. The part # for the replacement screen is
Inlet Valve Screen | Inlet Valve Screen |
Inserted | Removed |
B3000 SERVICE MANUAL |
|
40 |