3.Tightening the Mounting Screws. See Figures 18 and 19 below. The mechanism is shown outside of the coin accessory cabinet.
Coin slot
Figure 18
To tighten the mounting screws on the Quantum Pro device the upper panel must be opened. To open the panel depress the tab and pull back on the coin slot to rotate the panel toward you and down.
Figure 19
Once the panel is rotated down the screws will be exposed for tightening. After tightening rotate the panel up and back until it snaps closed.
4.Load coins in the coin changers as appropriate. Please refer to the respective unit’s manual for direction on how to load coins.
B3000 SERVICE MANUAL |
|
78 |