Quick Start Guide
Let the Magic Begin FAST!
Thank you for purchasing a Keurig® - Platinum B70 Gourmet Single Cup Home Brewing System.
IMPORTANT: You cannot use your Keurig Brewer until it has been primed for its first use as set forth below. Please follow these easy steps and you will discover what Deliciously Simple® truly means.
Please note, if your Brewer has been exposed to temperatures below freezing, it is recommended you allow two hours for an unpacked Brewer to warm to room temperature before priming or brewing.
1. Unpacking the Platinum B70 Brewer
a. Carefully remove the Brewer by placing the box on its side, pulling the Brewer out of the box and removing the protective materials.
b. Place the Brewer upright on a flat surface. Remove adhesive tape from Brewer.
c. Unwrap cord and plug Brewer into a grounded outlet.
2. Priming
a. Place a 12 oz. mug on the Drip Tray Plate.
b. Remove the Water Reservoir from the Brewer by first removing the Lid from the Water Reservoir, then lifting the Water Reservoir straight up and toward the front of the Brewer. Rinse and fill with bottled or filtered water. Replace the Water Reservoir back on the Brewer and replace the Lid.
c. Press and release the Power switch behind the Brewer to turn the Brewer on. Blue lights in the Water Reservoir and LCD Control Center will become illumi- nated.
d. The LCD Control Center will indicate ‘PRIME’ and the Brew button will flash. Please note, a
e. Press the flashing ‘BREW’ button.
f. The Brewer will automatically fill (priming it) and then the water will be heated. This will take about 4 minutes. During the heating period the ‘NOT READY’ indicator will be on. When the water is heated ‘BREW’ will be displayed and the Brew button will flash.
g. Press the ‘BREW’ button to start a cleansing brew, during which hot water will flow into your cup or mug. Discard the hot water.
h. The
NOTE: The Brewer may take
3. Choose
a. Place a cup or mug on the Drip Tray Plate. b. Select a
Do not remove the foil lid.
4. Brew
a. Lift the Handle, place the
Please be careful to avoid the sharp needles in the
b. All brew size icons are lit with the default size flash- ing. To choose a different size, press ‘LEFT’ to go down in size or ‘RIGHT’ to go up in size.
NOTE: The small mug (7.25 oz. serving) is the factory set default brew size. To program your favorite brew size, see page 11 in the Use & Care Guide “Programming Your Brew Size”.
c.Once size is chosen, press ‘BREW’ button. Brew but- ton will stop flashing and icon of brew size will be lit.
NOTE: Choosing a smaller cup size will brew stronger tasting coffee/tea/hot cocoa.
Please consult the Use & Care Guide for additional information on your Brewer. If you | Part #: |
are experiencing problems, contact Customer Service at | |
© 2006 Keurig Incorporated | Revision B, June 2006 |