Keurig V700 manual Caring For Your Brewer, Setting the Brew Temperature, Cleaning & Maintenance

SECTION 4

Setting the Time & Temperature

SECTION 5

Caring For Your Brewer

Lift to Brew

Settings

Time

Temperature

Temperature

(187º -197ºF)

Setting the Brew Temperature

The Brewer has a preset temperature of 192° F. You can adjust the temperature up or down in 1 degree increments within the Brewer range (187° - 197° F). Once set, your beverages will be brewed at the selected temperature.

At high altitudes if boiling occurs, use the temperature adjustment to lower the temperature so that boiling does not occur.

Here is how to set the brew temperature:

Step 1

Select the settings icon  on the Touchscreen, then select “Temperature.”

Step 2

This screen will allow you to set the temperature using the + and - buttons.

Step 3

Once the temperature has been set, select “SET” and you will be returned to the Settings Menu. Select the back

Cleaning & Maintenance

Cleaning External Parts

Cleaning of the Brewer’s external parts is recommended one to two times per month. Never immerse the Brewer in water or other liquids. The Housing and other external parts may be cleaned with a soapy, damp, non-abrasive cloth.

The Drip Tray can accumulate up to 13 oz. of overflow. The Drip Tray and the Adjustable Drip Tray Plate should be periodically inspected and rinsed clean. To remove the Drip Tray, simply slide it toward you, keeping it level at all times to avoid spilling. The Drip Tray should be cleaned with a soapy, damp, non-abrasive cloth. The Drip Tray and Adjustable Drip Tray Plate should not be put in the dishwasher.

Cleaning The Brew HEAD

Step 1 Lift the Brewer Handle.1 Step 2 Grip and press the buttons on both sides of

the Brew Head and tilt it down.

Step 3 Pull the Brew Head toward you to remove.

Carefully clean the Brew Head with a soapy, damp,

non-abrasive cloth and rinse thoroughly. The Brew2 Head should not be placed in the dishwasher.

192°F

arrow to return to the previous screen.

Return the Brew Head by sliding it gently back into place until you hear a click. Lower the Brewer Handle and you are ready to brew again.

3

SET

Cleaning the Water Reservoir &

Water Reservoir Lid

The Water Reservoir and Lid should not be put into the dishwasher. Clean them with a damp, soapy, non-abrasive cloth and rinse thoroughly. Do not dry the inside of the Water Reservoir with a cloth as lint may remain.

CAUTION: Rinse the Water Reservoir thoroughly after cleaning to ensure that no cleaners or cleaning solutions remain in this area as they may contaminate the water supply in the Brewer.

20 21