Assembly
Step 12
Note: Stretch all cables out completely and make sure all twisting is removed before installing. Install Mid Pulley Cable (46) as detailed in Figure 12. Follow dotted lines to identify exact location
of pulleys. See Page 29 “Cable View” for more detail.
Start by installing cable under the pulley at Leg Extension location.
You will need the following for installation: |
|
| |
Pulley (44) - Qty. 8 | Bolt (91) - Qty. 3 | Pulley Bracket w/ Shaft (21) - Qty. 1 | |
Cable (46) - Qty. 1 | Bolt (92) - Qty. 1 | Pulley Bracket Block (22) - Qty. 1 | |
Nylon Locknut (104) - Qty. 8 | Bolt (93) | - Qty 1 | Pulley Bracket (23) - Qty. 1 |
Long Pulley Spacer (53) - Qty. 6 | Bolt (94) | - Qty. 1 |
|
Longer Pulley Spacer (55) - Qty. 4 | Bolt (95) | - Qty. 1 |
|
Short Pulley Spacer (54) - Qty. 2 | Washer (102) - Qty. 18 |
| |
Figure 12
21
