Keys Fitness CZE Plus owner manual Program Mode, Enter Program

11Program and Operating Instructions

PROGRAM MODE

Plug treadmill into a surge protector outlet. Attach the Red Safety Key on to the treadmill console.

Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.

Press POWER button. There will be an eight (8) second delay before data can be entered. The TIME window will flash.

There are three (3) pre-set and six (6) semi-custom pre-set programs on the CARDIOZONE ELITE PLUS HR T treadmill. The treadmill includes FAT BURN, CARDIO, & WARM-UP programs. To select the program press the corresponding button on the console display

Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts moving.

CUSTOMIZING PROGRAMS in P1 and P2 Mode: Each pre-set program(Fat Burn, Cardio, Warm- up) can be customized in the P1 or P2 mode. After making the program selection, the Calorie window will read “OP”. The “OP” refers to “original program” and is preset. Press the same program button once more and the Calorie window will read P1. The “P1” mode is now accessed. You can now program the Time, Speed, and Incline in P1 mode, which will be saved for future workouts.

1)The TIME window will blink. Use the SPEED + or – arrows to select your workout time. Press

ENTER PROGRAM.

2)The SPEED window will then blink. Use the same + or – arrows to select the speed for your work- out. Press ENTER PROGRAM.

3)The INCLINE window will then blink. Use the INCLINE + or – arrows to set your workout incline. Press ENTER PROGRAM.

To start, press the START/STOP button. To access P2 mode, press the selected program button three times (once for OP, twice for P1, three times for P2). Follow the above steps 1-3 to customize P2 settings.

TO CHANGE A PREVIOUSLY PROGRAMMED P1, P2, or user program: Once you have pro- grammed the P1 or P2 modes, you will need to use the PAUSE button to change the program you previ- ously entered. For instance to change to a new setting in P1-FAT BURN, press the FAT BURN button twice to access P1. Then press the PAUSE button to get the TIME window to flash. Follow the direc- tions above to continue to change the program.

FAT BURN

CARDIO

START / STOP

POWER

WARM UP

PAUSE

ENTER PROGRAM