STEP 3
Slide Adjustable Leg Hold (7) down onto Rear Upright (2) and
secure by screwing Pop Pin into Adjustable Leg Hold (7).
Slide Bolt (21) into Rear Upright (2) and secure with Washers (28)
and Nylon Lock Nut (26).
Slide Upholstered Roller Pads (10) onto Adjustable Leg Hold (7) and
secure with Roller Pad Tube Caps (12). We recommend using a
rubber hammer to secure Roller Pad Tube Caps (12).
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly7