ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until STEP 8.
STEP 3
NOTE: Before completing any other steps, you should position each side of the unit where it will stay once fully assembled such that the total length is 12 feet long. This will keep you from having to move the unit once it is loaded with weights.
Slide Weight Bumpers (38) and
Guide Rods (9) into holes of Middle
Base (2).
Slide quantity 9 of the 10 lb plates (33) onto guide rods. Then slide quantity 10 of the 5 lb plates (34) onto guide rods.
Slide Top Plate (32) onto top of weight stack.
Repeat STEP 3 on other side.
[
