COMPSUBWOOFER

Owner’sManual

Models:

C15 / C12 / C10 / C8

SealedEnclosureApplications

The Comp generates more sound pressure than competing subwoofers on the market and excels when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive amounts of highly-accurate bass and can be driven with punishing levels of amplifier power.

Congratulations on your KICKER purchase

Please record your purchase

information and keep your sales receipt for validation of warranty.

Authorized Kicker Dealer:

_________________________

Purchase Date:

_________________________

Subwoofer Model Number:

_________________________

Subwoofer Serial Number:

_________________________

The Comp high performance suspension system can operate in a larger sealed enclosure. This maximum enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ enclosure generates a very flat response curve and superbly extends the subbass response.

Comp woofers perform well in any size sealed enclosure between the Compact and SQ volume

recommendations. These systems will exhibit benefits of both designs: Compact produces high-impact

bass, and SQ generates low bass frequency protraction. Overall, the system will sound more like the

recommended enclosure design it is closest to in enclosure volume. These enclosure recommendations

The Kicker Comp subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive environment. Comp subwoofers are extremely versatile, excel in a sealed or vented box, and surpass the competition on an infinite baffle (free-air) installation. They are made of advanced materials and construction techniques to maintain optimal performance for years to come.

Performance

 

Model:

C8

C10

C12

C15

 

Nominal Impedance [Zn], ohm

4 or 8

4 or 8

4 or 8

4 or 8

 

Resonance Frequency [fs], Hz

40.2

29.4

26.5

21.7

 

Power Handling Watts, Peak (RMS)

200 (100)

300 (150)

300 (150)

500 (250)

 

Sensitivity [SPLo], dB @ 1W, 1m

85.6

87.3

89.1

90.2

 

Effective Excursion [EXmax™], in (mm)

.34 (8.76)

.38 (9.76)

.38 (9.76)

.45 (11.53)

 

DC Resistance [Re], ohm

3.98

3.70

3.69

3.32

 

Mechanical Q-Factor [Qms]

10.00

9.65

9.61

11.20

 

Electrical Q-Factor [Qes]

.544

.473

.447

.397

 

Total Q-Factor [Qts]

.516

.451

.427

.383

 

Equivalent Volume [Vas], ft3 (L)

.69 (19.54)

2.27 (64.38)

4.5 (127.65)

9.61 (272.33)

PERFORMANCE

Net Displacement, in3 (cc)

38 (620)

60 (982)

105 (1719)

199 (3257)

Outer Frame Diameter, in (cm)

8 1/2 (21.6)

10 11/16 (27.1)

12 1/2 (31.7)

15 3/8 (39)

 

 

Hole Cut-Out Diameter, in (cm)

7 1/16 (18)

9 1/4 (23.5)

11 1/8 (28.3)

13 7/8 (35.2)

 

Mounting Depth, in (cm)

4 1/8 (10.4)

4 13/16 (12.3)

5 13/16 (14.8)

7 3/8 (18.8)

InfiniteBaffleMounting

have been calculated with the airspace inside the enclosure and include the displacement of the woofer.

INSTALLATION

All sealed-enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing.

Model:

SealedCompact (MinimumEnclosureVolume)

SealedSQ (MaximumEnclosureVolume)

 

C8

.5 ft3 (14.2L) Power Handling = 100W RMS

1.2 ft3 (34L) Power Handling = 100W RMS

 

 

C10

1.0 ft3 (28.3L) Power Handling = 150W RMS

2.4 ft3 (68L) Power Handling = 150W RMS

 

 

C12

1.25 ft3 (35.4L) Power Handling = 250W RMS

3.5 ft3 (99.1L) Power Handling = 150W RMS

 

 

C15

2.25 ft3 (63.7L) Power Handling = 250W RMS

5.0 ft3 (141.6L) Power Handling = 250W RMS

 

 

 

 

Panel Dimensions for CompactSealedEnclosures using 3/4” (1.9cm) thick MDF:

 

 

Model:

Volume, ft3 (L)

 

 

 

Panel A, in (cm)

Panel B, in (cm)

Panel C, in (cm)

 

 

 

C8

.5 (14.2)

 

 

11x11 (27.9x27.9)

11x9.5 (27.9x24.1)

9.5x9.5 (24.1x24.1)

 

 

C10

1.0 (28.3)

 

13.5x13.5 (34.3x34.3)

13.5x12 (34.3x30.5)

12x12 (30.5x30.5)

 

 

C12

1.25 (35.4)

 

14.5x14.5 (36.8x36.8)

14.5x13 (36.8x33)

13x13 (33x33)

 

 

C15

2.25 (63.7)

 

17.25x17.25 (43.8x43.8)

17.25x15.75 (43.8x40)

15.75x15.75 (40x40)

 

 

Figure 1

 

 

 

Front Sound

 

 

 

 

 

 

 

 

 

 

 

 

Waves

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Comp Subwoofer

 

 

 

 

 

 

 

 

Trunk / Storage Space

Rear Sound

B

 

 

 

 

 

 

 

Waves

 

Rear Seat

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The infinite baffle mounting method effectively utilizes the rear deck and trunk space of most sedan type vehicles. The Comp subwoofer does not require a sealed enclosure for thump’in performance. Carefully install the subwoofer in the baffle. Mark the rear deck or parcel shelf for the hole cut-out diameter of the subwoofer and cut the hole. The rear deck may need to be reinforced to help hold the weight of the subwoofer and to keep it from flexing during playback. Mount 3/4” (1.9 cm) thick MDF (Medium Density Fiberboard) to the bottom of the deck. Mark the MDF and cut the holes. If MDF is not available in your area, use high grade plywood. It is important to isolate the sound coming off the front of the subwoofer from the sound radiating from the back of the subwoofer. This isolation is usually accomplished by using the driver in a factory speaker location, or in a location with a semi-isolated rear chamber. See Figure 1.

Note: All specifications and performance figures are subject to change. Measurements based on 4 ohm voice coil models.

Please visit the www.kicker.com for the most current information.

Carefully mount loudspeakers in the trunk space or in other compartments of the vehicle. Pay attention to cable lines, trunk springs, hinges and seat mechanisms that could cause problems with the operation of the vehicle or stereo system. Carefully lay the stereo system cables; pay attention to seat fasteners and other items that could harm the cables.

Comp Subwoofer - Covered by one or more of the following patents: U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386, D449,293, D355,193, Taiwan Pat. #162,154; Other U.S. and foreign patents pending.

A

C

Figure 2

2

COMPSUBWOOFER

Please allow two weeks of break-in time for the subwoofer to reach optimum performance. To get the best performance

3

from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring.

Page 2
Image 2
Kicker C15 manual Models, Congratulations on your Kicker purchase, Please record your purchase, Subwoofer Serial Number

C15 specifications

The Kicker C15, a powerhouse in the realm of car audio, is designed to elevate your listening experience with its exceptional performance and innovative technology. Known for its high-quality sound reproduction, the C15 is a favorite among audiophiles and casual listeners alike. This subwoofer is a striking example of Kicker's commitment to creating products that deliver rich, deep bass while ensuring durability and reliability.

One of the most captivating features of the Kicker C15 is its size. With a 15-inch cone, it offers the capacity to produce substantial low-end frequencies that can transform any vehicle into a concert hall on wheels. Its oversized voice coil and robust motor structure ensure that the C15 can handle high power levels without distortion, providing clean and impactful sound.

The C15 utilizes a unique foam surrounding and heavy-duty cone construction to enhance its performance. The foam surround not only contributes to the longevity of the speaker but also allows for greater excursion, which increases the overall output of the subwoofer. This combination facilitates deep, resonant bass without compromising clarity, giving listeners an immersive audio experience.

Another notable technology featured in the Kicker C15 is its advanced cooling system. The subwoofer is designed with special venting that helps dissipate heat generated during prolonged use. This ensures that the performance remains optimal, even at high volumes, reducing the risk of damage from overheating and extending the life of the product.

The C15 also boasts a high power handling capability, typically rated around 1200 watts RMS. This means that it can work seamlessly with a variety of amplifiers, allowing users to customize their audio setup. Its dual voice coil configuration allows for versatile wiring options, making it easy to match with different systems and achieve the desired impedance.

Installation of the Kicker C15 is straightforward, thanks to its user-friendly design. The subwoofer's mounting depth and size are well-considered, allowing it to fit in a variety of spaces without unnecessary modification. With its striking appearance, featuring a sporty design and bold Kicker branding, this subwoofer not only sounds great but looks impressive as well.

In summary, the Kicker C15 is built to impress with its combination of size, power handling, innovative cooling technology, and durable construction. It stands out as a premier choice for anyone looking to enhance their vehicle's audio system, ensuring that every listening experience is powerful and richly detailed. With Kicker's reputation for quality and performance, the C15 continues to set a standard in the world of car audio subwoofers.