INSTALLATION
Amplifier | ask your | upgrade | slamm’in | Pro Tip: |
wiring diagram and VCVR12 is illustrated) | dealer about the Kicker ZX Amplifier upgrades. (ZX 400.1 Mono | to | system! The Kicker ZX line of | You are one ZX |
+ Mono Speaker | _ |
SafetyWarning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Battery |
|
|
|
|
|
|
|
|
|
|
| |
+12V |
|
|
|
| Remote |
|
|
|
| |||
|
|
|
|
|
|
|
| |||||
|
|
| (45cm) 18" Or Less | Grou |
|
|
| |||||
|
|
|
|
|
| |||||||
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Fuse |
|
|
|
|
| nd |
|
| ||
|
|
|
| |
| (60cm) 24" Or Less | ||||||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| ||
Minimum impedance of 2 ohms mono
+ | - |
|
|
|
|
|
|
|
|
|
|
| Figure 3 |
Signal |
|
| Signal | ||||||||
In |
|
| Ou |
| |||||||
|
|
|
|
|
|
|
| t (P.A.S.T.) |
| ||
Figure 4
|
| Mount Brackets to the bottom of the |
| |||
|
| enclosure using the supplied smaller |
| |||
|
| screws. Securely attach the enclosure to |
| |||
| the vehicle with the supplied larger screws. |
| ||||
|
| (VCVR Series is illustrated) |
| |||
CompVR Subwoofer - Covered by one or more of the following patents: |
| |||||
U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386, D449,293, |
| |||||
D355,193, Taiwan Pat. #162,154; Other U.S. and foreign patents pending. |
| |||||
Performance |
|
|
|
|
|
|
Model: | DCVR10 | DCVR12 |
| |||
|
|
|
|
| ||
Nominal Impedance [Zn], ohm [per enclosure] | 2 or 4 | 2 or 4 |
| |||
Sensitivity [SPLo], dB @ 1W, 1m | 96.5 | 98 |
|
| PERFORMANCE | |
Power Handling Watts, Peak (RMS) | 1600 (800) | 1600 (800) |
| |||
Enclosure Top Surface Depth, in (cm) | 13 | 7/16 (34.1) | 13 | 15/16 (35.4) |
| |
Enclosure Bottom Surface Depth, in (cm) | 16 | 7/16 (41.8) | 17 | 3/8 (44.1) |
| |
Enclosure Height, in (cm) | 14 | (35.6) | 16 | (40.6) |
| |
Enclosure Width, in (cm) | 28 | 1/2 (72.4) | 32 | 1/2 (82.6) |
| |
|
| |||||
Model: | VCVR12 | VCVR15 |
|
| ||
Nominal Impedance [Zn], ohm [per enclosure] | 2 or 4 | 2 or 4 |
| |||
Sensitivity [SPLo], dB @ 1W, 1m | 95 |
| 97.5 |
|
| |
|
| |||||
Power Handling Watts, Peak (RMS) | 800 (400) | 1000 (500) |
|
| ||
Enclosure Top Surface Depth, in (cm) | 11 | 9/16 (29.4) | 13 | (33.1) |
|
|
Enclosure Bottom Surface Depth, in (cm) | 14 | 13/16 (37.6) | 16 | 7/8 (42.9) |
|
|
To avoid potential injury, or possible death, from forward movement of the enclosure during abrupt stops or accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are solely responsible for securely fastening the enclosure in your vehicle.
4COMPVRSUBWOOFERENCLOSURE
Enclosure Height, in (cm) | 16 | (40.6) | 18 | 7/8 (47.9) |
Enclosure Width, in (cm) | 17 | 1/2 (44.5) | 20 | 5/16 (51.6) |
Note: The use of a subsonic filter will significantly increase the power handling. The power handling specifications in these charts are |
|
calculated using a 25Hz, 24dB per octave subsonic filter. Measurements based on 4 ohm voice coil models. All specifications and | 5 |
performance figures are subject to change. Please visit the www.kicker.com for the most current information. |
