Kicker ES154, ES104, ES124 manual Features

Features

￿Injection Molded Polymineral Cone with ISD™ (Inverted Structural Dome) is a high performance composite, which remains rigid, minimizes cone flex and lowers harmonic distortion. The ES Subwoofer’s cone moves as a light weight piston, exhibiting power and control.

￿Double Stitched Surround adds a mechanical fastener to the chemical adhesives. This duo prevents the cone and surround from separating in the harshest conditions.

￿Optimized Polyfoam Ribbed Surround Radius allows extended cone excursion for additional bass output and higher SPL, and couples the suspension into a conjoined linear- motion body.

￿High-Temp Polyimide Film Voice Coil Former improves sonic and conductive properties, and prevents thermal-electrical meltdown.

￿Ultra-Length Voice Coil sustains enormous cone excursion and provides extra heat dissipation.

￿High-Power Tinsel Lead Wires eliminate broken leads and power loss, due to the common use of “insufficient-gauge” lead wires.

￿Spring-Loaded Nickel Plated Terminals flawlessly connect medium to heavy gauge speaker wire to the high-power tinsel lead wires.

￿Two-Piece Vented Hyper-Extended Blackened Pole Piece and Backplate

1.Optimizes heat transfer efficiency for cooler operation and maximum power handling ability.

2.Eliminates erratic magnetic flux from the voice-coil gap.

3.Releases pressure under the suspension for uniform cone movement and responsive low bass.

4.Prevents the voice-coil from bottoming out and corresponding damage.

￿New Enhanced BAM (Basket and Motor) Assembly utilizes a high strength steel basket, features a low-profile open design, and provides a solid foundation for the precision-aligned motor assembly.

￿Perimeter Venting in the BAM relieves pressure from under the spider, supports a linear excursion, and helps dissipate heat from the voice coil and motor structure.

Features

ES Subwoofers 3