Figure 4
Figure 3
INSTALLATION
Locking Terminal Cover
Gold Plated Male Quick Disconnect
Loops for mounting with Zip Ties
Wire Divider
Mount the speaker and grille right
Wiring
Carefully place the speaker wire in a location that is clear of standing water and moving components of the vessel. For reference, the Blue wire is Positive and the Silver wire is Negative. The locking terminal cover with water resistant gasket is removable for wiring installation; it helps prevent terminal corrosion and electrical shorting. Connect the gold plated male quick disconnect on the end of the 18 inch (46cm) speaker wire lead coming out of the sealed speaker basket to the gold plated female quick disconnect on the supplied 15 feet (4.5m) of wire to the same color of wire. Place the connected wires into the locking terminal, make sure the divider separates the blue and silver wire quick disconnects, and snap the locking terminal cover into place. Connect the other end of the heavy gauge wire to your amplifier in accordance with its owner's manual. Mount the locking terminal cover in a location free and clear of standing water by utilizing the supplied zip ties through the integrated loops in the locking terminal cover. See Figures 4 and 5.
Performance
Model:
Woofer Size, in (cm)
Tweeter Size, in (cm)
Dome Material
Nominal Impedance [Zn], ohm Power Handling Watts, Peak (RMS) Sensitivity [SPLo], dB @ 1W, 1m Effective Frequency Range, Hz Mounting Hole Diameter, in (cm) Mounting Depth, in (cm)
Figure 5
KM620
6(16) 3/4 (2.0) Titanium 4
195 (65)
90
5 1/8 (13)
2 7/8 (7.2) Yes
PERFORMANCE
4 | KMCOAXIALSPEAKER |
Kicker Marine speakers use the highest level of magnetic shielding available to minimize compass and gauge deviation in your dash. |
|
Kicker Marine speakers meet or exceed industry standards for environmental humidity and corrosion, |
|
and for material degradation due to UV exposure. | 5 |
|
