Kicker KX1600.1, KX800.1, KX1200.1 KX.1-SERIES Amplifiers Model, Performance, Installation

KX.1-SERIES AMPLIFIERS

OWNER’S MANUAL

MODEL:	KX400.1 / KX800.1 / KX1200.1 / KX1600.1 / KX2400.1
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
PERFORMANCE
Model:		KX400.1	KX800.1	KX1200.1	KX1600.1	KX2400.1
RMS Power
@ 14.4V, 4Ω mono, ≤ 1% THD+N		200W x 1	400W x 1	600W x 1	800W x 1	1200W x 1
@ 14.4V, 2Ω mono, ≤ 1% THD+N		400W x 1	800W x 1	1200W x 1	1600W x 1	2400W x 1
Length in [cm]		8 [20.4]	9 9/16 [24.4]	9 9/16 [24.4]	11 3/16 [28.4] 15 1/2 [39.4]
Specifications common to all models:
Height in [cm]		2 1/8 [5.5]
Width in [cm]		8 5/16 [21]
Frequency Response ± 1dB		10Hz–160Hz
Signal-to-noise Ratio		>95dB, A-weighted, re: rated power
Input Sensitivity		Low Level: 125mV–5V
		High Level: 250mV–10V
Electronic Crossover		Variable Lo-pass 40Hz–160Hz, 24dB/octave
Bass Boost		Parametric 20-80Hz; Variable Q: 1 to 5; Variable Boost, 0-18dB
Subsonic Filter		Variable 10–80Hz, 24dB/octave
Remote Bass		Yes [included]

Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use genuine KICKER accessories and wiring.

INSTALLATION

Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er.

2

2013 KX Mono Amps Rev G.indd 2

11/13/2012 2:17:11 PM