Wiring
Your Midbass driver has two spring loaded terminals. The red terminal is con- nected to the positive wire and the black terminal is connected to the negative wire from the source unit or amplifier. Since your midbass drivers have a limited frequency range it is recommended to use a bandpass crossover. Use either a passive unit to connect into an existing system or for higher performance, an electronic crossover and a dedicated amplifier.
Kicker recommends using the RMB series midbass drivers in conjunction with the Resolution Series or Kicker Series Components. This will create a seamless sound stage.
Other
Channel
_ | SOURCE UNIT | _ |
+ |
| + |
6 dB / Octave
Tweeter
+
&URVVRYHU_
| Midrange |
CAPACITOR COIL
+
400 ∝f
To Amplifier
1.6 mH
_
12 dB / Octave
CAPACITOR COIL
+
70 ∝f
9 mH
To Amplifier
2.2 mH
_
(OPTIONAL PASSIVE CROSSOVER COMPONENTS)
+
To
Speaker
_
+
To
281 ∝f Speaker
_
+
_
RMB Midbass
+
_
If you have more questions about the installation of your KICKER component, see the Authorized KICKER Dealer where you made your purchase. You may con- tact us via the Technical Services page on www.kicker.com. or call our Technical Services Line at
3
