Kicker ST1000, ST800 installation instructions Installation Instructions, Specifications

ST SERIES

Full Range Enclosure Systems

Congratulations! You have just purchased the latest in full range speaker enclo- sures to carry the famous KICKER name. Your KICKER speakers were designed and engineered by the same team which created many other international award winning KICKER components like the Solo-Baric, Comp VR, and Resolution driv- ers. They contain a number of cutting-edge features to give you outstanding per- formance and dependability. Thanks for buying KICKER. Enjoy!

Installation Instructions

Place the enclosure behind the seat of your pickup with the tweeter toward the outside of the vehicle.

Plug the speaker wires securely into the left and right speaker terminals. Make certain the polarity is the same on both sides. Failure to do this will result in the two channels being out of phase and will drastically reduce bass performance.

Specifications

		Components	Amplifier Power	Frequency	Dimensions
Model	Type	(per enclosure)	Min. / Max.	Response	(H x W x D)
ST1000	2-Way	10” woofer,	6 / 150	40-21kHz	14-1/2”x20-1/2”x7-1/4”
	3-3/4” exponential tweeter				36.83cmx52.07cmx18.42cm
ST800	2-Way	8” woofer,	6 / 125	42-21kHz	13-1/16”x18”x6-7/8”
	3-3/4” exponential tweeter				33.18cmx45.72cmx17.46cm

All models are 4 Ω, dual enclosure systems

* assumes typical music program with minimal amplifier clipping

IMPORTANT WARNING

This speaker system is designed to be placed behind the seats of a pickup. If using the system in any other type of installation, you must securely fasten each enclosure to the vehicle to avoid potential injury from forward movement of the enclosures during abrupt stops or accidents.