COMPVTSUBWOOFER
EnclosureOwner’sManual
| Pro Tip: You are one ZX Mono- |
| Amplifier and a few cables away |
| from a slamm’in system! The |
Door | Kicker ZX line of |
Frame | make it easy to upgrade to rock- |
Congratulations on your KICKER purchase
Please record your purchase
information and keep your sales receipt for validation of warranty.
Models: | TCVT12 / TCVT10 |
Authorized Kicker Dealer: | _________________________ |
Purchase Date: | _________________________ |
Enclosure Model Number: | _________________________ |
Enclosure Serial Number: | _________________________ |
solid bass with your existing or |
stock source unit. Please ask |
your dealer about the Kicker ZX Amplifier upgrades.
Seat
The Kicker CompVT subwoofer enclosures were specially designed for “Livin’ Loud” out in the harsh
Behind the seat
automotive environment. They are made of advanced materials and construction techniques to maintain optimal performance for years to come.
CheckTheLoad
The CompVT subwoofer enclosures are internally wired for a 2 or 4 ohm load at the
TCVTSealed
The TCVT Series sealed enclosures combine KICKER’s award winning line of subwoofers with
mounting, speaker fires into the back of the seat.
INSTALLATION
The Kicker TCVT Series enclosure is designed to fit behind the seat of a pickup truck, coupe or wherever space is limited. This design is engineered to provide the best bass response when firing into the back of the seat.
Please note: The reason the TCVT enclosre is so slim and fit, is because we have added a thin metallic “Clarance” plate to allow room for the CompVT’s massive magnet and motor sturcture.
CONFIGURATION | Performance |
|
|
| Plug your subwoofer speaker wire into the terminals, using the red connector as positive and the black | ||
| connector as negative. Hook the other end of the wire to your subwoofer amplifier in accordance with | ||
| its owner's manual. |
|
|
| CompVT Subwoofer - Covered by one or more of the following patents: | ||
| U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386, D449,293, | ||
| D355,193, Taiwan Pat. #162,154; Other U.S. and foreign patents pending. | ||
| Model: | TCVT10 | TCVT12 |
|
|
|
|
| Nominal Impedance [Zn], ohm [per enclosure] | 2 or 4 | 2 or 4 |
| Sensitivity [SPLo], dB @ 1W, 1m | 96.5 | 98 |
| Power Handling Watts, Peak (RMS) | 800 (400) | 800 (400) |
| Enclosure Top Surface Depth, in (cm) | 3 9/16 (9.0) | 3 9/16 (9.0) |
| Enclosure Bottom Surface Depth, in (cm) | 6 5/16 (16.0) | 6 3/4 (17.1) |
| Enclosure Height, in (cm) | 11 7/16 (29.1) | 13 1/4 (33.7) |
| Enclosure Width, in (cm) | 19 5/16 (49.0) | 21 1/2 (54.6) |
Note: The use of a subsonic filter will significantly increase the power handling.
The power handling specifications in these charts are calculated using a 25Hz, 24dB per octave subsonic filter.
2COMPVTSUBWOOFERENCLOSURE
Floor Board
Figure 1
Sound Check: Poor bass response? Check the system phasing by reversing a speaker connection from positive to negative on the subwoofer channel; if the bass improves, then the subwoofer was out of phase in reference to the rest of the system.
ImportantSafetyWarning
To avoid potential injury, or possible death, from forward movement of the enclosure during abrupt stops or accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are solely responsible for securely fastening the enclosure in your vehicle.
P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • (405)
Note: All specifications and performance figures are subject to change. Please visit the www.kicker.com for the most current information.
To get the best performance from your new Kicker Subwoofer, we recommend using genuine Kicker Accessories and Wiring.
Please allow two weeks of
from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring. 11202006+07CVTBox
3