(continued)
– 
+ 
– 
+ 
BYPASS | LOWPASS | HIPASS | ZRX | SUBWOOFER CROSSOVER MODULE | |
|
|
|
| ||
|
|
|
| ||
S1 |
|
| |||
Setting the ZRX
Bypass Mode - Amplifier reproduces the full frequency range Low Pass Mode - Amplifier frequencies 80Hz and lower High Pass Mode - Amplifier frequencies 100Hz and higher
IMPORTANT OPERATION NOTES
An Active Signal Processing Module must be installed in the Module Docking Port in order for the amplifier to operate. Never power up the amplifier without a module installed. Never remove or insert a module with the amplifier powered up. Failure to follow these precautions can result in damge to your speaker(s) and/or amplifier(s) which may not be covered under warranty.
Typical Installations
Daisy Chaining Two Amplifiers | Adding a KICKER Amplifier and Subwoofer |
with ZRX Modules | to your Factory Stereo |
SOURCE
HIGH
–
+ 
–
+ 
+ – | + – |
Midrange
LOW
–
+ 
–
+ 
+ –
To Additional Amps 
(Optional)Subwoofer
ZRX Specifications
Crossover Slope | 12dB/octave |
Crossover Points | 80Hz low pass |
| 100Hz high pass |
Factory Source
(Speaker Level Out)
Line Out
Converter
LOW
–
+ 
–
+ 
Subwoofer
5
