Kidde 976 manual Architectural and Engineering Specifications, Technical Specifications, Model

Battery Operated Smoke Alarm w/ Front Load Battery Door

Architectural and Engineering Specifications

The smoke alarm shall be Kidde Model 0976 or approved equal. It shall be powered by a 9V battery source. The unit shall incorporate an ionization sensor with nominal sensitivity of 0.92%/ft. The temperature operating range shall be between 40°F and100°F (4°C and 38°C) and the humidity operating range shall be 5% - 95% relative humidity. The alarm shall provide optional tamper resistance that locks the bat- tery door closed. No additional pieces shall be required to activate this feature.

The alarm shall include an easy access battery compartment that is opened and closed by pressing on the battery door. The 9V battery carrier will ensure proper battery power protection by not allowing the battery door to close if the battery is placed in the unit incorrectly or if a battery is not present. The unit shall also provide an optional tamper resistant switch that will help prevent the battery door from being opened.

The unit shall include a piezoelectric horn that is rated at 85 deci- bels at 10 feet. The unit shall include the Hush® feature that silences the unit for approximately 7 minutes if a nuisance condition occurs.

The alarm will chirp every 30 - 40 seconds while in hush mode and will automatically reset.

The unit shall incorporate a red LED, which will flash once every 30-40 seconds to indicate the alarm is operating properly and will flash once per every 1.5 seconds when the unit is alarming and will remain so until the air is cleared.

The unit shall at a minimum meet the requirements of UL217,

NFPA72, and The California State Fire Marshall, NFPA101 (0ne and two family dwellings), Federal Housing Authority (FHA), Housing and Urban Development (HUD).

Model 0976

Technical Specifications

Model Number:				0976
Power Source:				9V Battery
Audio Alarm:				85dB at 10ft
Temperature Range:				40˚F to 100˚F (4˚C to38˚C)
Humidity Range:				5%-95% relative humidity (RH)
Sensor:				Ionization
Size:				5” in diameter x 1.79” depth
Weight:				.5lbs
LED:				Red, alarm condition
Warranty:				10 year limited warranty
	5.6" w/trim
		5"	alarm		1.79"

Ordering Information

Single Clam UPC: 0-47871-05672-9

Part			Dimensions		Case/	Layers/	Skid
Number	I 2 of 5	Pack Quantity	(w x d x h inches)	Weight	Skid	Skid	Weight
N/A**	N/A	Individual	7 x 3 x 11	.5lbs	N/A	N/A	N/A
0976-9997	100 47871 05672 6	PDQ (2 units)	7.75 x 6 x 11.75	1lb	105	7	105lbs
0976-9996	200 47871 05672 3	Cut Case (12 units)	16 x 20.75 x 11.75	6lbs	18	3	108lbs
21006133	300 47871 05672 0	Power Tower (36 units)	20 x 24 x 35.5 (incl. pallet)	18lbs	3	3	18lbs
**Not for sale by individual unit
					1	2	12
Twin Clam UPC: 0-47871-05678-1					UNIT	PDQ	CUT CASE
Part			Dimensions		Case/	Layers/	Skid
Number	I 2 of 5	Pack Quantity	(w x d x h inches)	Weight	Skid	Skid	Weight
N/A**	N/A	Individual	14.5 x 2 x 11.25	1lbs	N/A	N/A	N/A
0976-9995	100 47871 05678 8	Cut Case (10 units)	16 x 20.75 11.75	10lbs	16	4	160lbs
21005691	200 47871 05678 5	Power Tower (30 units)	20 x 24x 41 (incl. Pallet)	30lbs	3	3	30lbs

**Not for sale by individual unit

1016 Corporate Park Drive Mebane NC 27302 1-800-880-6788 www.kidde.com

1	10	30
UNIT	CUT CASE	POWER TOWER

Distributed by:

P/N: KL-0918 sheet rev. 01-2009